GT2871 USERS. SR motor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

EsChassisLove · 04-27-2013, 12:06 AM

Exactly bro.

Looking at this guys SR20 that is very similar to mine. He has 264/264 11.5mm lift cams and stock valves compared to my 260/260 11.2mm and +1mmvalves. Also he is on enthalpy and I am on AEM V2.

He made 418whp 330wtq at 17psi. 250wtq at 4300rpm. And his HP never fell it only kept climbing, tq stayed flat.

I'm positive my tuner can bring that 250wtq to around 3800, with around 340-350wtq. And hp around the same at 8500rpm.

I'm sacrificing a few hundred rpm at the low end but my redline will go from 7000 to 8-8500.

I'm very excited.

04-27-2013, 12:06 AM	#11
EsChassisLove Nissanaholic! Join Date: Jan 2011 Location: San Diego Age: 36 Posts: 2,090 Trader Rating: (26) Feedback Score: 26 reviews	Exactly bro. Looking at this guys SR20 that is very similar to mine. He has 264/264 11.5mm lift cams and stock valves compared to my 260/260 11.2mm and +1mmvalves. Also he is on enthalpy and I am on AEM V2. He made 418whp 330wtq at 17psi. 250wtq at 4300rpm. And his HP never fell it only kept climbing, tq stayed flat. I'm positive my tuner can bring that 250wtq to around 3800, with around 340-350wtq. And hp around the same at 8500rpm. I'm sacrificing a few hundred rpm at the low end but my redline will go from 7000 to 8-8500. I'm very excited. __________________ IG/TikTok-ThatS14_Z06guy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode