The Two-tone Preservation Society

[Big Zee]

I can get you a picture later today SupaDoopa.

what I did though, was cut the tape on a rough 45* angle and ended it just after the part of the bumper where it allows for the stripe.
If I had to do it again, I think I would do the whole bumper instead of the sides.

I used 3/4 black stripe that I got from Roundex ( automotive paint supply here in canada. ) Supposed to be OEM grade.
when you put it on though, make sure you don't wax the car first haha, I got excited and did my sanding/polishing/waxing first, then had to use wax remover to get the tape to bond then do my waxing all over again.