![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
![]() |
#27 |
Zilvia Addict
![]() Join Date: Jul 2013
Location: Georgia
Age: 35
Posts: 880
Trader Rating: (3)
![]() Feedback Score: 3 reviews
|
well here my take on it....
That car appears to be what i would say 40% of the way rusted to the point i wouldn't touch it. The bolts on the underside of the car are rusted and some look worse than others. Being you have only severe rust on the front support, i would replace those pieces. As far as "working" on the car such as if the car were to need bushings which i can see it needs very badly, be prepared for the heads of bolts to just fall off when attempting to remove the bolts. Be prepared with a air powered cutting wheel, torch, a welder and a lot of damn elbow grease. The car is fixable but omg would that be a PITA to work on that particular car being it is not completely trashed but it is at the point where every nut and bolt on the damn underside/undercarriage of the s13 will not come off or just break.... be ready for some serious work, or sell it and get a better 13 or 14.
__________________
95 S14 se RB25DET 348whp ![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|