My Block Ruined? (Head studs gone bad) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ichiban4 · 11-25-2013, 04:04 PM

Just an update 4 of the 10 were stripped and I hadn't even tried torquing the others down yet so I am avoiding a repair kit and just decided to go with the mazworx 1/2" studs. They are pricey but at least I will have the peace of mind I don't have a band-aid covered block and head lift shouldnt be an issue. My machine shop said 100$ to drill the head and block or about 200$ to tap them all too, I can at least tap them myself if not do the drilling as well so after everything I will still be coming out around the same price as the Time -Sert kit.

11-25-2013, 04:04 PM	#13
Ichiban4 Zilvia Junkie Join Date: Apr 2011 Location: Denver / Kanagawa Posts: 371 Trader Rating: (4) Feedback Score: 4 reviews	Just an update 4 of the 10 were stripped and I hadn't even tried torquing the others down yet so I am avoiding a repair kit and just decided to go with the mazworx 1/2" studs. They are pricey but at least I will have the peace of mind I don't have a band-aid covered block and head lift shouldnt be an issue. My machine shop said 100$ to drill the head and block or about 200$ to tap them all too, I can at least tap them myself if not do the drilling as well so after everything I will still be coming out around the same price as the Time -Sert kit. __________________ ☆ Panda Pirates ☆

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode