CA Nissan 240SX Coupe Drift Shell with Roll cage and goodies!

[R2RO]

Putting up this shell for sale, since I basically already parted it out all the way.

Price: $3900 Firm
$600 off original price as of $4500, price is going up in march to $4350 again.

Cars location in California:
Palmdale, CA 93551

Car specs:
1989 Nissan 240SX XE
Clean Title in Hand
--Was involved in small rear end collision (Was repaired but still noticeable inside trunk), thank you to a fellow zilvia member for bring this to my attention. Photos of repair and damage are below.
Mileage: 123k Miles
Reg till April 2016, Was going to register it Non-OP after the smog expires. Perfect drift or track car project.

Parts to be included(Will be Updated, NOT PARTING ANYTHING OUT IN THIS LIST)

Check out my other listing for the parts being sold off this car still:
http://zilvia.net/f/showthread.php?t=618178

Parts on the Car, As of Jan 19th:
-Parts by Max MaxPro Coil-Overs $1350.00
-Parts by Max Solid Sub frame Risers $100.00
-Parts by Max Rear Drop Knuckles $400.00
-Parts by Max RLCA $550.00
-Energy Suspension Steering rack Bushings $10.00
-Circuit Sports Aluminum Steering Linkage Spacer $21.50
-Stock suspension Links
-Ichiba 5 Lug conversion Front $269.10
-Ichiba 5 Lug conversion Rear $269.10
-DMax Rear Taillights $80.00
-Nissan Z32 Aluminum 30mm Front Caliper Pair $250
-Nissan Z32 Aluminum Rear Caliper Pair $200
-Chase Bays Fender well Brake Lines for Z32 Calipers $99.99
-Porterfield R4 AP460 Front brake pads for z32 $148.15
-Porterfield R4 AP461 Rear brake pads for z32$113.95
-Kaaz 2-Way Diff $845.75
-Custom GSWERKS Full 6-point Roll cage w/ Door Bars, Extra Support Bars, Gussets Top Drift Spec. $1600
-VIS Carbon Fiber hood with AeroCatch Latches $529.95
-NRG Hub w/ Quick release and Lock $260.83
-Nissan S13 Silvia K’s Front End Conversion with Projector Headlights(One has a broken tab, Needs to be repaired) $700
-Welded in bracket for hydro E-brake, No stock E-brake mount anymore)
-Nissan Z32 Hydro Dual Caliper Full Bolt On Set-up: (ASD 16’’ Pull back Universal Hydraulic E-Brake 3/4 , Custom Lines Included, Z32 Calipers) $700

Roughly over $8500 in parts and fabrication invested in the car not including labor, not looking to get that since the stuff is used but I just wanted you guys to know what you're getting if you brought this stuff new like I did throughout the years.

Free parts to be included!
New Mishimoto Aluminum Fan Shroud Kit for SR20(MMFS-S13-89SR) $185.50
-Almost New 500 Hp compatible frozen boost Front mount intercooler $149.99
-Custom GSWERKS Oil Cooler (Thermostatic) with Circuit Sports Oil Cooler Adapter plate $200
-Custom GSWERKS Oil Catch can, worked great on the old SR motor $60
-ATP Manual Boost controller $61.25
-New Parts By Max S13 Skid Plate (Gold) $120
-S13 SR Intercooler piping $50

You're getting $1220+ in free parts for those looking to refresh a SR20, and a good project shell.

Here's a few photo of the car, showing the condition of the exterior and interior. I can upload more to interested buyers. I also included progress photos of the build from when I started it a few years ago to current day.

As of Jan.16th the car is still missing RLCA and Rear Knuckles in order to make it a roller again, so i'm not in a rush to sell this thing. Send me any and all offers, I will take the best one if its reasonable. Also the car will only come with the parts listed above! This car is going to be sold bare so you can have a clean canvas to go with which ever route you desire.

Please don't low ball me, the car has quality parts and a high quality roll cage installed by GSWerks out here in the Antelope Valley.

Price: $3900 Firm

UPDATED Jan.31: As pointed out by a fellow Zilvia member, I forgot that the rear end was involved in a small collision and was repaired. The Drivers side frame rear by the tail lights has a crack in it and the passenger side has some but not as bad as the driver side.

Photo of damage to driver side frame rail(Once again thanks for bringing this to my attention):















Before the Roll cage was fab'd in and car was cleaned up after gutting it.





Current car condition photos, as of January 18th 2016:















Engine Bay photos:

[mmilite]

Would you take $2500 ? Don't take offense just gauging where you're heads at

[JdM_JunKiE]

You got a ball park price?

[R2RO]

Originally Posted by mmilite

Would you take $2500 ? Don't take offense just gauging where you're heads at

Thank you for your offer, I will save it and pick out one once the car is 100% rolling again.

[R2RO]

Originally Posted by JdM_JunKiE

You got a ball park price?

No ball park price, i'm just looking at any and all offers I receive for it. You can get a rough ball park price by looking at the value in parts that you'll be getting.

[mmilite]

Originally Posted by R2RO

Thank you for your offer, I will save it and pick out one once the car is 100% rolling again.

So you're going to get it rolling now? I thought you were selling it as is?

[R2RO]

Originally Posted by mmilite

So you're going to get it rolling now? I thought you were selling it as is?

Its currently on jacks as of Jan.17th.
The rear subframe needs to be reinstalled, but im currently missing 2 suspension pieces hence why im just looking at what offers I get for it. If something catches my eye I will accept it.

[mmilite]

Originally Posted by R2RO

Its currently on jacks as of Jan.17th.
The rear subframe needs to be reinstalled, but im currently missing 2 suspension pieces hence why im just looking at what offers I get for it. If something catches my eye I will accept it.

How about $3400? 😁

[R2RO]

Originally Posted by mmilite

How about $3400? 😁

Is that USD? and this car is pretty far away from you its like 1700 miles away. I'm not sure how it would work with the DMV

[mmilite]

Originally Posted by R2RO

Is that USD? and this car is pretty far away from you its like 1700 miles away. I'm not sure how it would work with the DMV

Yes that's USD and I would come there with a truck and trailer or I would have it setup to be delivered. Wouldn't have to be registered till I actually get it road ready so there would be no issue, unless there is something you're not telling me ?

[R2RO]

Updated the thread with current car condition photos with some of the parts reinstalled; as of January 18th 2016. Don't be afraid to send me offers if you're an interested buyer, none will be ignored. Have a good day guys!

[zspeedrft]

How much for carbon fiber trunk? I can pick up..pm me

[R2RO]

Updated photos of the rear subframe and whats being included with it:
-Kaaz 2-Way
-Parts by Max Solid Subframe Risers
-Parts by Max RLCA
-Parts by Max Rear Drop Knuckles with dual caliper for Z32 (Dual Calipers Included)
-Circuit Sports Rear Sway bar endlinks
-Stock RUCA, Tension Rod, and Toe Arm

Car is almost ready to become a roller again.

Going to drop in the rear subframe tomorrow.

Updated the thread with the price, its just a ball park price. Im more interested in offers
$4500 OBO, Send offers my way.

[ianmyers]

Bump for a good deal. I based my cage off of this car, also done by GSwerks. GLWS man

[R2RO]

Bump, Almost finished this car up.
It just needs inner tie rods, which I will install soon!
Price is $4500 OBO, More interested in offers! Don't be afraid to send me an offer, they will all be replied too.
Updated the thread with current condition car photos, they're toward the bottom of the 1st post.

[R2RO]

Morning bump to the top for Jan. 24th
Send me any and all offers, you can come check out the shell if you're local.

[R2RO]

Late night bump for this car, please send any and all offers if you're interested.
Jan. 25th

[Rgutierrez]

Still have this?

[R2RO]

Originally Posted by Rgutierrez

Still have this?

Yes I do, message me to set up a day to see it if you're interested in it.

[Rgutierrez]

I just did

[R2RO]

UPDATED Jan.31st

As pointed out by a fellow Zilvia member thank you for bring this back to my attention, I forgot that the rear end was involved in a small collision and was repaired. The Drivers side frame rear by the tail lights has a still has crack in it and the passenger side has some but not as bad as the driver side.[/COLOR]

Photo of damage to driver side frame rail(Once again thanks for bringing this to my attention):

[R2RO]

bump for Feb.3rd, A few people have came out to check out the car. PM me if you're interested to set up a day that you can come and check out the car.

[R2RO]

Bump to the top, car is getting the motor removed today. So it can be picked up same day if we can come to an agreement.

[R2RO]

Accidentally uploaded a double post, the post below is the new information/photos for the thread

[R2RO]

I just updated the thread with new photos of the engine bay since I took out the motor and transmission today.


Engine Bay photos:





This is how it will be sold.

[NY2NV Miner]

Is this car "rollable?"

Besides an engine and trans, what will this car need to be drive-able again?

[R2RO]

Originally Posted by NY2NV Miner

Is this car "rollable?"

Besides an engine and trans, what will this car need to be drive-able again?

Basically everything that involves the motor i.e. (Trans, wiring, motor, and driveshaft)

It needs wheels just to be able to roll again. It's basically ready to pick up if I can strike a deal with a potential buyer.

[R2RO]

Zilvia messed up again(Double post), sorry please ignore this message.

[R2RO]

I'm also willing to throw in these items for someone who can reach or come close to my asking price:

-New Mishimoto Aluminum Fan Shroud Kit for SR20(MMFS-S13-89SR)
-Almost New 500 Hp compatible frozen boost Front mount intercooler
-Custom GSWERKS Oil Cooler (Thermostatic) with Circuit Sports Oil Cooler Adapter plate
-Custom GSWERKS Oil Catch can, worked great on the old SR motor
-ATP Manual Boost controller
-New Parts By Max S13 Skid Plate (Gold)
-S13 SR Intercooler piping
-Can throw in a Blown Red Top SR20 if buyer pays asking price.

Basically I'm throwing in $1000 worth of parts in for free, for anyone who can pay my asking price or can give me one really good offer that I can't refuse.

Price again is $4500 OBO

[dertys13]

If I can get the cash together, before this sells I want it.