What standalone ecu do u recomend?!?!

[TheRealSy90]

Originally Posted by KAT-PWR

Retail 2.3 million for that set up?

Just checked, yikes 2k and you're not even rolling yet

Almost anybody should be able to purchase an Infinity EMS for under MSRP. Lets say sub 1,400. A wiring harness from WS is 600. So 2 grand and you're rolling with an Infinity EMS.


The BTI Canbus gauge is $350 I believe. But it's not a necessity. Hell if you have an Infinity hooked up to the proper sensors, and failsafes enabled properly, there's really no need to have any gauges at all unless you want to monitor stuff that it's already monitoring.

[KAT-PWR]

Originally Posted by TheRealSy90

Almost anybody should be able to purchase an Infinity EMS for under MSRP. Lets say sub 1,400. A wiring harness from WS is 600. So 2 grand and you're rolling with an Infinity EMS.


The BTI Canbus gauge is $350 I believe. But it's not a necessity. Hell if you have an Infinity hooked up to the proper sensors, and failsafes enabled properly, there's really no need to have any gauges at all unless you want to monitor stuff that it's already monitoring.

pricey for the bare min