Blitz EBC settings - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

khoadogg · 12-20-2004, 02:23 PM

Has anyone successfully set their Blitz Dual SBC for 12psi? I can't find the right gain or ratio for a solid 12psi. What are your settings? How do I know if my solonoids are bad?

Thanks in advance,
Kho-ah

mike2016 · 12-20-2004, 07:59 PM

internal or external wastegate?

usually I set it at 20-25% gain, and start from 0 SET and work your way up.

I got 1 bar when i had my sbc-id set to 25 gain, 45 set. on GT25R 0.86a/r with hks actuator.

khoadogg · 12-21-2004, 12:00 AM

opps sorry, internally wastegate set at 7psi but now it's shimmed to 9psi and gets up to 10-11psi w/ the exhaust

mike2016 · 12-21-2004, 01:55 AM

Quote:

Originally Posted by khoadogg

opps sorry, internally wastegate set at 7psi but now it's shimmed to 9psi and gets up to 10-11psi w/ the exhaust

what's your gain setting? the setting that sets your response, lower = more stable boost. higher gain setting will result in boost creep/spike.

12-20-2004, 02:23 PM	#1
khoadogg Nissanaholic! Join Date: Oct 2003 Location: San Jose, CA Age: 41 Posts: 2,423 Trader Rating: (11) Feedback Score: 11 reviews	Blitz EBC settings Has anyone successfully set their Blitz Dual SBC for 12psi? I can't find the right gain or ratio for a solid 12psi. What are your settings? How do I know if my solonoids are bad? Thanks in advance, Kho-ah __________________ AIM SoarinStrong[B]STRONG 6iX[B] RB single turbo ///Work AMKREAD 180sx

12-21-2004, 12:00 AM	#3
khoadogg Nissanaholic! Join Date: Oct 2003 Location: San Jose, CA Age: 41 Posts: 2,423 Trader Rating: (11) Feedback Score: 11 reviews	opps sorry, internally wastegate set at 7psi but now it's shimmed to 9psi and gets up to 10-11psi w/ the exhaust __________________ AIM SoarinStrong[B]STRONG 6iX[B] RB single turbo ///Work AMKREAD 180sx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2004, 07:59 PM	#2
mike2016 Zilvia Junkie Join Date: Oct 2001 Location: Los Angeles Age: 44 Posts: 538 Trader Rating: (0) Feedback Score: 0 reviews	internal or external wastegate? usually I set it at 20-25% gain, and start from 0 SET and work your way up. I got 1 bar when i had my sbc-id set to 25 gain, 45 set. on GT25R 0.86a/r with hks actuator.