Clutch won't engage - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jefro240 · 07-25-2017, 01:55 PM

Can you hear the release bearing when you push the clutch in?

Fork or Pivot may not be engaged properly etc so when you do push the clutch pedal in, it is not pushing the release bearing into the pressure plate to release the clutch.

Otherwise, as Kyral mentioned. Slave cylinder... Because if you are able to bleed it properly the MC should be fine.

07-25-2017, 01:55 PM	#3
Jefro240 Leaky Injector Join Date: Jun 2005 Location: Eastern Hemisphere Posts: 123 Trader Rating: (0) Feedback Score: 0 reviews	Can you hear the release bearing when you push the clutch in? Fork or Pivot may not be engaged properly etc so when you do push the clutch pedal in, it is not pushing the release bearing into the pressure plate to release the clutch. Otherwise, as Kyral mentioned. Slave cylinder... Because if you are able to bleed it properly the MC should be fine. __________________ \| 92 S13 Hatch \| 92 S13 Coupe \| 95 S14.5 \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode