Sparco seat bracket question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

koga_shuko · 07-24-2017, 07:37 PM

Heya guys I just purchased a set of sparco r333 seats and they came with Wedge brackets and sliders. Anyway the seats are sitting super high...im 5 foot 7 inches and my head is almost touching the roof! ive been looking around and cant find a solid answer. Ive also emailed sparco but havent gotten a response yet. Anywho... I know some manufacturers make low brackets but which will fit my seats? Or would it be better to get a base like the one Planted makes and put my seat on there with no slider?

KJR50 · 07-31-2017, 03:59 PM

R333 seat bottom is super thick. You're going to sit high unless you can figure out a way to mount the seat directly on to floor pan.

1on1 · 07-31-2017, 04:40 PM

^This

From the looks of the seat, it seems to be bottom mount which don't have good options for off the shelf seat brackets/rails. Correct me if I am wrong but, you'll have a lower seat if they were side-mount.

07-24-2017, 07:37 PM	#1
koga_shuko Join Date: Mar 2016 Location: Illinois Age: 34 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Sparco seat bracket question Heya guys I just purchased a set of sparco r333 seats and they came with Wedge brackets and sliders. Anyway the seats are sitting super high...im 5 foot 7 inches and my head is almost touching the roof! ive been looking around and cant find a solid answer. Ive also emailed sparco but havent gotten a response yet. Anywho... I know some manufacturers make low brackets but which will fit my seats? Or would it be better to get a base like the one Planted makes and put my seat on there with no slider?

07-31-2017, 04:40 PM	#3
1on1 Post Whore! Join Date: Aug 2005 Location: Norcal Age: 39 Posts: 3,321 Trader Rating: (15) Rides Gallery: 1on1 Feedback Score: 15 reviews	^This From the looks of the seat, it seems to be bottom mount which don't have good options for off the shelf seat brackets/rails. Correct me if I am wrong but, you'll have a lower seat if they were side-mount. __________________ instagram

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-31-2017, 03:59 PM	#2
KJR50 Leaky Injector Join Date: Sep 2014 Location: SoCal Posts: 141 Trader Rating: (12) Feedback Score: 12 reviews	R333 seat bottom is super thick. You're going to sit high unless you can figure out a way to mount the seat directly on to floor pan.