Floor jack / lift options for lowered cars

[jumpman2334]

do you have a link EJ8?

i bought these, only to realize its only for lifts and jacks, not the actual jackstands themselves.

https://www.shopfigs.com/v3/jack_frame_adapter

[mau5trap]

Originally Posted by 5280VertDET

Hockey Puck with a slice taken out by a wood hand saw almost half way through.

those don't work with jack stands.

Originally Posted by EJ8 944

I use silicone jack stand covers when I have my car on jackstands. When I lift it, metal on metal for both my front subframe and rear diff.

got a link to the one you use?

Originally Posted by jumpman2334

do you have a link EJ8?

i bought these, only to realize its only for lifts and jacks, not the actual jackstands themselves.

https://www.shopfigs.com/v3/jack_frame_adapter

https://www.phase2motortrend.com/pro...ajackbl-gd.htm

These phase2 adapters I was looking at look like they're only for lifts and jacks too. I was looking at aluminum jack stands that have the flat top, they look like they might work with frame adapters, but I'm not sure.

[EJ8 944]

Originally Posted by jumpman2334

do you have a link EJ8?

Originally Posted by mau5trap

got a link to the one you use?

I use these on my jack stands:
[URL=https://www.amazon.com/dp/B000NSMXS6/ref=cm_sw_em_r_mt_dp_U_J77pCb0DT32FM[/URL]

Placed on the location shown on the S14 FSM page above ^

They fit pretty snug onto my craftsman stands, and the combo vaults over the hump for the S14 jackstand points really well.

[mau5trap]

Originally Posted by EJ8 944

I use these on my jack stands:
[URL=https://www.amazon.com/dp/B000NSMXS6/ref=cm_sw_em_r_mt_dp_U_J77pCb0DT32FM[/URL]

Placed on the location shown on the S14 FSM page above ^

They fit pretty snug onto my craftsman stands, and the combo vaults over the hump for the S14 jackstand points really well.

Thanks. Just out of curiosity, which craftsman stands do you have??




oh and the other day I found this on the interweb. This would be so clutch for 240s. I wonder what brand they are, been trying to find them.

[EJ8 944]

Originally Posted by mau5trap

Thanks. Just out of curiosity, which craftsman stands do you have??

oh and the other day I found this on the interweb. This would be so clutch for 240s. I wonder what brand they are, been trying to find them.

I use these:
https://www.sears.com/craftsman-3-to...p-00950159000P

Craftsman 3 ton (x4)

[mau5trap]

Originally Posted by EJ8 944

I use these:
https://www.sears.com/craftsman-3-to...p-00950159000P

Craftsman 3 ton (x4)

Are the teeth at the top deep enough on those craftmans that it won't touch the pinch welds when you place the jacks under the jack points?

[EJ8 944]

Originally Posted by mau5trap

Are the teeth at the top deep enough on those craftmans that it won't touch the pinch welds when you place the jacks under the jack points?

I’m not entirely sure for pristine ones, the previous owner of my car or some shop in the past lifted from this area before so mine are a little pushed down, it clears them how they currently are, and they haven’t degraded or anything in the past 9 years of ownership for me.