s13 pop up motor func check - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rfs324 · 03-30-2019, 08:28 PM

Hey guys,
I'm wiring my pop up headlights to a momentary on/off/on switch to bypass all the relays and timers. My understanding is that black is the ground wire, brown is the up signal, and purple/white is the down signal. Tested the motor by supplying 12v directly to the purple/white and ground, motor went down. Do the same thing to the brown/ground, motor doesn't go up. Is my motor shot? My other side is a "new" remanufactured one, and it won't go up or down. Do I have two dead motors or am I missing something?

03-30-2019, 08:28 PM	#1
rfs324 Leaky Injector Join Date: Oct 2018 Location: Wilmington, NC Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	s13 pop up motor func check Hey guys, I'm wiring my pop up headlights to a momentary on/off/on switch to bypass all the relays and timers. My understanding is that black is the ground wire, brown is the up signal, and purple/white is the down signal. Tested the motor by supplying 12v directly to the purple/white and ground, motor went down. Do the same thing to the brown/ground, motor doesn't go up. Is my motor shot? My other side is a "new" remanufactured one, and it won't go up or down. Do I have two dead motors or am I missing something?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode