R33 Exhaust onto an S14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

krappy · 06-15-2009, 07:08 AM

I've been searching around and cant seem to find an answer to this... a local importer has quite a few r33/r32 catbacks laying around and I was wondering how hard it would to fit one onto an s14... Some have told me that its a direct bolt on and some have told me it would have to be modded to fit. I wanted a definite answer to this, anyone have any ideas? I know I should just buy a s14 exhaust but its these r33/r32 exhaust are being sold for dirt cheap....

ZenkiKid · 06-15-2009, 07:33 AM

if it wont work you can still buy it and re do the piping

garagelu · 06-15-2009, 08:09 AM

I have a r33 jic magic exhaust on my s14 and yes you do have to modify it a little. The rear section all work with the stock exhaust hanger locations but the mid section is not the right length and you will have to figure out how to make it work. All I did was weld a length of pipe to make it work.

Sr20-Vert · 04-14-2023, 03:13 PM

Quote:

Originally Posted by garagelu

I have a r33 jic magic exhaust on my s14 and yes you do have to modify it a little. The rear section all work with the stock exhaust hanger locations but the mid section is not the right length and you will have to figure out how to make it work. All I did was weld a length of pipe to make it work.

So you gotta just add some length to the middle or the rear ?

AKADriver · 04-14-2023, 07:44 PM

Remove length from the midsection.

jr_ss · 04-14-2023, 09:28 PM

There are other differences as well. The rear bumper isn’t as fat on the 33 as it is on the 14, so the mounts are located slightly different and the tip is shorter. I have a Legalis R for both chassis in my garage.

Sr20-Vert · 04-15-2023, 12:07 AM

Quote:

Originally Posted by jr_ss

There are other differences as well. The rear bumper isn?t as fat on the 33 as it is on the 14, so the mounts are located slightly different and the tip is shorter. I have a Legalis R for both chassis in my garage.

I really like the idea of 95mm i havnt made my downpipe yet so I didn?t care if it was a little shorter I could can run the downpipe longer in a nut shell give me the run down on making this work going for 900 hp in my sr20 so I really wanted to get the hks hi power sounds like it won?t be super loud gonna be running 4 inch down pipe as well

schassis240 · 05-31-2023, 10:55 PM

idk but why not just buy a full s14 exh..better in the long run

06-15-2009, 07:08 AM	#1
krappy Nissanaholic! Join Date: Jan 2006 Location: Norcross, GA Posts: 1,634 Trader Rating: (41) Feedback Score: 41 reviews	R33 Exhaust onto an S14 I've been searching around and cant seem to find an answer to this... a local importer has quite a few r33/r32 catbacks laying around and I was wondering how hard it would to fit one onto an s14... Some have told me that its a direct bolt on and some have told me it would have to be modded to fit. I wanted a definite answer to this, anyone have any ideas? I know I should just buy a s14 exhaust but its these r33/r32 exhaust are being sold for dirt cheap....

04-14-2023, 09:28 PM	#6
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	There are other differences as well. The rear bumper isn’t as fat on the 33 as it is on the 14, so the mounts are located slightly different and the tip is shorter. I have a Legalis R for both chassis in my garage. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-15-2009, 07:33 AM	#2
ZenkiKid Post Whore! Join Date: Nov 2005 Location: Nowhere Age: 35 Posts: 3,285 Trader Rating: (9) Feedback Score: 9 reviews	if it wont work you can still buy it and re do the piping

06-15-2009, 08:09 AM	#3
garagelu Nissanaholic! Join Date: Aug 2005 Location: Atlanta, GA Age: 40 Posts: 1,856 Trader Rating: (60) Feedback Score: 60 reviews	I have a r33 jic magic exhaust on my s14 and yes you do have to modify it a little. The rear section all work with the stock exhaust hanger locations but the mid section is not the right length and you will have to figure out how to make it work. All I did was weld a length of pipe to make it work.

04-14-2023, 07:44 PM	#5
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	Remove length from the midsection.

05-31-2023, 10:55 PM	#8
schassis240 Join Date: Mar 2023 Location: hawaii Age: 41 Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	idk but why not just buy a full s14 exh..better in the long run