How much is a clutch slave and master cylinder? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Natty · 03-11-2002, 09:55 PM

Does anyone know much it runs for parts and labor at a competent mechanic? I was told they were about to go when I had it looked over, but I never got an estimate.  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt='

'>
Thanks,
Jeff

96SEChick · 03-11-2002, 09:58 PM

I had mine done at a Nissan dealer and it cost me $250, which included the parts, installation, bleeding of clutch lines, and replacement of fluid.  It was done last August.

wherezmytofu · 03-11-2002, 10:04 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (96SEChick @ Mar. 09 2002,11:58)</td></tr><tr><td id="QUOTE">I had mine done at a Nissan dealer</td></tr></table><span id='postcolor'>
dealer!........*graps ass lub <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'>  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/butbut.gif" border="0" valign="absmiddle" alt=':but:'>  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cry.gif" border="0" valign="absmiddle" alt='

'>

91CRXsiR · 03-12-2002, 03:07 AM

had mine replaced recently for about 175.. not nissan dealer but OEM parts

96SEChick · 03-12-2002, 06:24 AM

<!--QuoteBegin--wherezmytofu+Mar. 11 2002,10<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (wherezmytofu @ Mar. 11 2002,10<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>4)</td></tr><tr><td id="QUOTE">dealer!........*graps ass lub <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/butbut.gif" border="0" valign="absmiddle" alt=':but:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cry.gif" border="0" valign="absmiddle" alt='

'></td></tr></table><span id='postcolor'>

lmao. I was desperate, I didn't even have 1 inch of clutch pedal use. The shaft inside the master cylinder was actually broken and they said it was kind of a bitch to get out anyway because of it.

Getting mine done at the dealer only cost me $75 more than 91CRXsiR's job, so I don't think I got bent over too badly.  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'>

geeaj · 03-12-2002, 12:39 PM

The parts are only about $60 bucks total. Expect about 2/3 hrs for labor. So around 200bucks would be a good price.

WhiteS13 · 03-19-2002, 07:06 PM

The seals required for the rebuild will only cost you $15-20.  It's quite simple once you've taken it apart.  The bore sizes are stamped on the cylinders.

Natty · 03-19-2002, 07:58 PM

Well, the local dealer quoted me $360 plus tax and shop supplies. The master and slave from them added up to $200 alone! I haneded the guy the print out of courtesyparts.com and suggested that they find a way to get cheaper parts in the future. Meanwhile I applied some of the money I took out of the bank and oredered a FSM from them. Now I need a jack and stands. I am sick of being a money tree for greedy assholes. I'll leanr to do work myself.
At worst, I'll have to go to my mechanic and pay $300 for the whole job.
asshole dealers.
Jeff

S13Grl · 03-19-2002, 08:27 PM

Mine cost $135 at the dealer. About two weeks ago. Both master and slave. Parts were $66.00.

03-11-2002, 09:55 PM	#1
Natty Zilvia Addict Join Date: Dec 2001 Location: Nashville, TN Posts: 944 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone know much it runs for parts and labor at a competent mechanic? I was told they were about to go when I had it looked over, but I never got an estimate.  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=''> Thanks, Jeff __________________ 1991 White 240sx Fastback LE, rusty spoiler, weak driveshaft, exhaust rattle.... Rattles are just your cars way of saying 'I love you.'

03-11-2002, 09:58 PM	#2
96SEChick Nissanaholic! Join Date: Jun 2001 Location: Broken Arrow, OK Age: 48 Posts: 1,814 Trader Rating: (0) Feedback Score: 0 reviews	I had mine done at a Nissan dealer and it cost me $250, which included the parts, installation, bleeding of clutch lines, and replacement of fluid.  It was done last August. __________________ Lauren '91 300ZX TT Ultra Red 5-speed - JWT POPCharger, JUN flywheel, ACT clutch, Energy Suspension Bushings, Tokico Blues - dyno'ed 295hp/306tq '94 300ZX TT Black Emerald Pearl 5-speed - JWT POPCharger, JWT ECU w/ Stillen chip, Stillen exhaust, Tokico Blues, Eibach ProKits, 18" Enkei RP-01 wheels - dyno'ed 333hp/385tq '00 WS6 Trans Am Bright Red 6-speedFOR SALE - only 29k miles, stock, fully loaded, only $23,999 (NADA $26300) Green Country Motorsports Northeastern Oklahoma SCCA

03-11-2002, 10:04 PM	#3
wherezmytofu BANNED Join Date: Nov 2001 Posts: 1,873 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (96SEChick @ Mar. 09 2002,11:58)</td></tr><tr><td id="QUOTE">I had mine done at a Nissan dealer</td></tr></table><span id='postcolor'> dealer!........*graps ass lub <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'>  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/butbut.gif" border="0" valign="absmiddle" alt=':but:'>  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cry.gif" border="0" valign="absmiddle" alt=''>

03-12-2002, 06:24 AM	#5
96SEChick Nissanaholic! Join Date: Jun 2001 Location: Broken Arrow, OK Age: 48 Posts: 1,814 Trader Rating: (0) Feedback Score: 0 reviews	<!--QuoteBegin--wherezmytofu+Mar. 11 2002,10<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (wherezmytofu @ Mar. 11 2002,10<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>4)</td></tr><tr><td id="QUOTE">dealer!........*graps ass lub <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/butbut.gif" border="0" valign="absmiddle" alt=':but:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cry.gif" border="0" valign="absmiddle" alt=''></td></tr></table><span id='postcolor'> lmao. I was desperate, I didn't even have 1 inch of clutch pedal use. The shaft inside the master cylinder was actually broken and they said it was kind of a bitch to get out anyway because of it. Getting mine done at the dealer only cost me $75 more than 91CRXsiR's job, so I don't think I got bent over too badly.  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'> __________________ Lauren '91 300ZX TT Ultra Red 5-speed - JWT POPCharger, JUN flywheel, ACT clutch, Energy Suspension Bushings, Tokico Blues - dyno'ed 295hp/306tq '94 300ZX TT Black Emerald Pearl 5-speed - JWT POPCharger, JWT ECU w/ Stillen chip, Stillen exhaust, Tokico Blues, Eibach ProKits, 18" Enkei RP-01 wheels - dyno'ed 333hp/385tq '00 WS6 Trans Am Bright Red 6-speedFOR SALE - only 29k miles, stock, fully loaded, only $23,999 (NADA $26300) Green Country Motorsports Northeastern Oklahoma SCCA

03-12-2002, 12:39 PM	#6
geeaj Zilvia Junkie Join Date: Dec 2001 Posts: 357 Trader Rating: (0) Feedback Score: 0 reviews	The parts are only about $60 bucks total. Expect about 2/3 hrs for labor. So around 200bucks would be a good price. __________________ Beware the fury of a silent man, be more cautious of his silent farts....

03-12-2002, 03:07 AM	#4
91CRXsiR Nissanaholic! Join Date: Oct 2001 Location: City of Industry, CA [626] Age: 42 Posts: 2,092 Trader Rating: (1) Feedback Score: 1 reviews	had mine replaced recently for about 175.. not nissan dealer but OEM parts

03-19-2002, 07:06 PM	#7
WhiteS13 Leaky Injector Join Date: Jan 2002 Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	The seals required for the rebuild will only cost you $15-20.  It's quite simple once you've taken it apart.  The bore sizes are stamped on the cylinders. __________________ WhiteS13 aka Vince 1993 White 240SX LE 1992 White Prelude VTEC 4WS

03-19-2002, 07:58 PM	#8
Natty Zilvia Addict Join Date: Dec 2001 Location: Nashville, TN Posts: 944 Trader Rating: (0) Feedback Score: 0 reviews	Well, the local dealer quoted me $360 plus tax and shop supplies. The master and slave from them added up to $200 alone! I haneded the guy the print out of courtesyparts.com and suggested that they find a way to get cheaper parts in the future. Meanwhile I applied some of the money I took out of the bank and oredered a FSM from them. Now I need a jack and stands. I am sick of being a money tree for greedy assholes. I'll leanr to do work myself. At worst, I'll have to go to my mechanic and pay $300 for the whole job. asshole dealers. Jeff __________________ 1991 White 240sx Fastback LE, rusty spoiler, weak driveshaft, exhaust rattle.... Rattles are just your cars way of saying 'I love you.'

03-19-2002, 08:27 PM	#9
S13Grl Married to the Mob Join Date: Dec 2000 Age: 44 Posts: 3,670 Trader Rating: (0) Feedback Score: 0 reviews	Mine cost $135 at the dealer. About two weeks ago. Both master and slave. Parts were $66.00.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode