Anyone have a Bee*R rev limiter working on their SR? NEED HELP - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wutangben · 09-12-2005, 09:43 AM

Hey guys,

A couple weeks ago I bought a used Bee*R rev limiter from a reputable member on this board and I haven't been able to get it to work. The wiring diagram seems pretty simple, although the description underneath the diagram tells you to do something different than the actually diagram. However, I followed the diagram. Power, Ground, CAS 1 degree, & CAS 180 Degree. When I couldn't get it to work at the ECU I decided to try to wire it directly to the CAS since that's what the previous owner had to do. There are 4 wires coming off of the CAS, 2 black & white, 1 all black, and 1 all white. I tapped into the all black and all white wires but still wasn't able to get it to work. I've tried switching the CAS wires to make sure I don't have them backwards, plus I've tried giving it direct power from a battery. So far the rev limiter has done absolutely nothing for me, so I'm beginning to believe that it's defective. I've heard that quite a few SR people have trouble wiring these up and getting them to work, so I figured I'd post here to see what my options were before asking for a refund from the seller. I'd rather have it working than have the seller give me a refund, so any help will be appreciated. If anyone that has it working could tell me exactly which pins they tapped into for the green and yellow wires, I think that would help me out the most.

Thanks,
Ben

wutangben · 09-12-2005, 04:48 PM

no one? :/ need to figure this out asap...

09-12-2005, 09:43 AM	#1
wutangben Zilvia Addict Join Date: Sep 2003 Location: IL Age: 44 Posts: 739 Trader Rating: (3) Feedback Score: 3 reviews	*Anyone have a BeeR rev limiter working on their SR? NEED HELP** Hey guys, A couple weeks ago I bought a used Bee*R rev limiter from a reputable member on this board and I haven't been able to get it to work. The wiring diagram seems pretty simple, although the description underneath the diagram tells you to do something different than the actually diagram. However, I followed the diagram. Power, Ground, CAS 1 degree, & CAS 180 Degree. When I couldn't get it to work at the ECU I decided to try to wire it directly to the CAS since that's what the previous owner had to do. There are 4 wires coming off of the CAS, 2 black & white, 1 all black, and 1 all white. I tapped into the all black and all white wires but still wasn't able to get it to work. I've tried switching the CAS wires to make sure I don't have them backwards, plus I've tried giving it direct power from a battery. So far the rev limiter has done absolutely nothing for me, so I'm beginning to believe that it's defective. I've heard that quite a few SR people have trouble wiring these up and getting them to work, so I figured I'd post here to see what my options were before asking for a refund from the seller. I'd rather have it working than have the seller give me a refund, so any help will be appreciated. If anyone that has it working could tell me exactly which pins they tapped into for the green and yellow wires, I think that would help me out the most. Thanks, Ben

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-12-2005, 04:48 PM	#2
wutangben Zilvia Addict Join Date: Sep 2003 Location: IL Age: 44 Posts: 739 Trader Rating: (3) Feedback Score: 3 reviews	no one? :/ need to figure this out asap...