Has anyone tried the blaZt Nissan ECU Interface Cable + Software??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ask52 · 09-18-2005, 01:23 PM

I was looking around on ebay and found this interesting product. Here is the link:

http://cgi.ebay.com/ebaymotors/NISSA...74381147QQrdZ1

It say's it works with the s13,s14,s15, but it didn't say if it would work with the sr or not. I emailed to find out so I'm just waiting for a reply. I was wondering if any of you guys have tried it out?

Thanks...Josh

NismoSilvia270R · 09-18-2005, 01:47 PM

thats pretty expensive. i've never worked with them or heard of them, but if you search for zcontrol.net or PLMSdevelopments you'll find alot of great information on making your own interface for $10, or ordering one for cheap adn the software is free. also, there are forums about both of those consults which can help alot.

im only suggesting those two because they are pretty popular and i've found alot of information on them.

also, concerning compatibility with sr or not, if it has the diagnostic port (consult port) it will plug in. any software should do and most software have the option to select the engine. sr compatible consults seem to be more popular than ka...

sr240mike · 09-18-2005, 02:07 PM

It will work with sr20det. The software is Nissan Datascan from Plms development for $20. I still have my consult interface, although I soldered in Cat-5 cable instead of using the actual consult connector (due to sr swap in a sohc car). If you're car is an s13 chassis it will NOT work with Sohc, due to them not using the Consult diagnostic. You can have my interface with instructions for $50 shipped.

skiboard06 · 09-18-2005, 05:15 PM

any idea on where to get the good software and cable that you guys are talking about ?

sr240mike · 09-18-2005, 05:58 PM

www.plmsdevelopments.com
www.blazt.biz

ask52 · 09-18-2005, 06:15 PM

Thanks for all the info guys! My 240 is a 1989, so I will have to look into the wireing. When I installed the ecu I didn't hook up the check plug.

09-18-2005, 01:23 PM	#1
ask52 Leaky Injector Join Date: Aug 2005 Location: North west Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	Has anyone tried the blaZt Nissan ECU Interface Cable + Software??? I was looking around on ebay and found this interesting product. Here is the link: http://cgi.ebay.com/ebaymotors/NISSA...74381147QQrdZ1 It say's it works with the s13,s14,s15, but it didn't say if it would work with the sr or not. I emailed to find out so I'm just waiting for a reply. I was wondering if any of you guys have tried it out? Thanks...Josh

09-18-2005, 02:07 PM	#3
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	It will work with sr20det. The software is Nissan Datascan from Plms development for $20. I still have my consult interface, although I soldered in Cat-5 cable instead of using the actual consult connector (due to sr swap in a sohc car). If you're car is an s13 chassis it will NOT work with Sohc, due to them not using the Consult diagnostic. You can have my interface with instructions for $50 shipped. __________________ TWO IN THE COOT, ONE IN THE POOT

09-18-2005, 05:58 PM	#5
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	www.plmsdevelopments.com www.blazt.biz __________________ TWO IN THE COOT, ONE IN THE POOT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-18-2005, 01:47 PM	#2
NismoSilvia270R Zilvia Junkie Join Date: Jan 2004 Location: Clarksville Age: 39 Posts: 510 Trader Rating: (1) Feedback Score: 1 reviews	thats pretty expensive. i've never worked with them or heard of them, but if you search for zcontrol.net or PLMSdevelopments you'll find alot of great information on making your own interface for $10, or ordering one for cheap adn the software is free. also, there are forums about both of those consults which can help alot. im only suggesting those two because they are pretty popular and i've found alot of information on them. also, concerning compatibility with sr or not, if it has the diagnostic port (consult port) it will plug in. any software should do and most software have the option to select the engine. sr compatible consults seem to be more popular than ka...

09-18-2005, 05:15 PM	#4
skiboard06 Leaky Injector Join Date: Mar 2005 Location: Cincinnati Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	any idea on where to get the good software and cable that you guys are talking about ?

09-18-2005, 06:15 PM	#6
ask52 Leaky Injector Join Date: Aug 2005 Location: North west Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for all the info guys! My 240 is a 1989, so I will have to look into the wireing. When I installed the ecu I didn't hook up the check plug.