knock sensor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

smithers584 · 04-05-2006, 06:04 PM

ok well i finally got it off, but heres my ?. on the plug that goes into the main harness, there are 2 pins and to wires ,i followed from those pins down the pigtail towards the sensor. when i look at that plug, i only find one pin and one wire going into it, with the second wire stripped and wrapped around the first one. does the second wire need to be hooked up? please help, daily driver down.

g6civcx · 04-05-2006, 06:14 PM

Which engine?

smithers584 · 04-05-2006, 06:17 PM

sorry , sr20det

04-05-2006, 06:04 PM	#1
smithers584 Zilvia Junkie Join Date: Dec 2004 Location: sc Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	knock sensor ok well i finally got it off, but heres my ?. on the plug that goes into the main harness, there are 2 pins and to wires ,i followed from those pins down the pigtail towards the sensor. when i look at that plug, i only find one pin and one wire going into it, with the second wire stripped and wrapped around the first one. does the second wire need to be hooked up? please help, daily driver down.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-05-2006, 06:14 PM	#2
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Which engine?

04-05-2006, 06:17 PM	#3
smithers584 Zilvia Junkie Join Date: Dec 2004 Location: sc Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	sorry , sr20det