What parts needed with Megan susp. Can I clear tires?! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slider2828 · 04-14-2006, 12:56 PM

I have 17x8 +35 FN's all around I needed at least a 10mm spacer in front and I could clear the rears without a spacer probably. So probably to be on the safe side pending on your offset of the front, I would maybe do a 10mm in the front, and maybe a 10mm in the rear.... It should work. I used kics spacers, no hub bolts needed cause they just bolt on, but you need to shave the existing hub bolts so they don't hit your rims....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-14-2006, 12:56 PM	#2
slider2828 Post Whore! Join Date: Oct 2004 Location: San Francisco, CA Posts: 6,040 Trader Rating: (13) Feedback Score: 13 reviews	I have 17x8 +35 FN's all around I needed at least a 10mm spacer in front and I could clear the rears without a spacer probably. So probably to be on the safe side pending on your offset of the front, I would maybe do a 10mm in the front, and maybe a 10mm in the rear.... It should work. I used kics spacers, no hub bolts needed cause they just bolt on, but you need to shave the existing hub bolts so they don't hit your rims....