brake question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

smithers584 · 04-18-2006, 05:35 PM

hey i searched but dont have much time so i need a straight answer please. I can get some 2003 350z brake calipers and rotors for cheap, so will these work. im pretty sure they are the regular, non brembo ones, because the guy said he upgraded. anyone know the specs on these, size and what not. thanks

cosmoworks · 04-18-2006, 11:05 PM

'03 350Z rotors (non-track models) front rotor size:
- 296mm diameter
- 24mm width

They'll bolt up if:
- You drill out the spindle mounting holes to 14mm
- Find new bolts or get creative with spacers, since the Z33 caliper bolts are too long

The rear's won't bolt up unless you make a bracket.

-Cosmo

NIK90s13 · 04-19-2006, 06:43 AM

http://www.zilvia.net/f/showthread.p...ht=350z+brakes

NIK90s13 · 04-19-2006, 06:59 AM

http://www.zilvia.net/f/showthread.p...ht=350z+brakes

Hey smithers, I had a littel time this morning, Hope this gives you an idea atleast, It looks like some custom fabing and e brake issues.

smithers584 · 04-19-2006, 09:52 AM

ok thanks for the help guys, he sold them to someone else because i didnt think they would be as good as z32 tt brakes. i just had millions of things going on and didnt have time to search. but good news, found all four calipers off a 92tt for $150! haha, finally i will be able to stop without tearing up my rotors! thanks again for the help and thanks for searching NIk90s13, pos rep for both of you.

NIK90s13 · 04-19-2006, 02:20 PM

cool , good luck on the calipers, let me know how that goes, take photos if you can!!!

04-18-2006, 05:35 PM	#1
smithers584 Zilvia Junkie Join Date: Dec 2004 Location: sc Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	brake question hey i searched but dont have much time so i need a straight answer please. I can get some 2003 350z brake calipers and rotors for cheap, so will these work. im pretty sure they are the regular, non brembo ones, because the guy said he upgraded. anyone know the specs on these, size and what not. thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-18-2006, 11:05 PM	#2
cosmoworks Join Date: Apr 2006 Location: So. Cal Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	'03 350Z rotors (non-track models) front rotor size: - 296mm diameter - 24mm width They'll bolt up if: - You drill out the spindle mounting holes to 14mm - Find new bolts or get creative with spacers, since the Z33 caliper bolts are too long The rear's won't bolt up unless you make a bracket. -Cosmo

04-19-2006, 06:43 AM	#3
NIK90s13 Zilvia Junkie Join Date: Jan 2006 Location: texas Age: 58 Posts: 471 Trader Rating: (0) Feedback Score: 0 reviews	http://www.zilvia.net/f/showthread.p...ht=350z+brakes

04-19-2006, 06:59 AM	#4
NIK90s13 Zilvia Junkie Join Date: Jan 2006 Location: texas Age: 58 Posts: 471 Trader Rating: (0) Feedback Score: 0 reviews	http://www.zilvia.net/f/showthread.p...ht=350z+brakes Hey smithers, I had a littel time this morning, Hope this gives you an idea atleast, It looks like some custom fabing and e brake issues.

04-19-2006, 09:52 AM	#5
smithers584 Zilvia Junkie Join Date: Dec 2004 Location: sc Posts: 416 Trader Rating: (0) Feedback Score: 0 reviews	ok thanks for the help guys, he sold them to someone else because i didnt think they would be as good as z32 tt brakes. i just had millions of things going on and didnt have time to search. but good news, found all four calipers off a 92tt for $150! haha, finally i will be able to stop without tearing up my rotors! thanks again for the help and thanks for searching NIk90s13, pos rep for both of you.

04-19-2006, 02:20 PM	#6
NIK90s13 Zilvia Junkie Join Date: Jan 2006 Location: texas Age: 58 Posts: 471 Trader Rating: (0) Feedback Score: 0 reviews	cool , good luck on the calipers, let me know how that goes, take photos if you can!!!