Tein HA spring rates for autocross - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jmizell2 · 04-20-2006, 01:56 PM

I just bought a used set of tein HA and I need to send them in for rebuild which is a perfect time to revalve for heavier spring rates. Stock are 6/336 front and 5/280 rear. I was thinking of increasing the front/rear to 10/8 like the superdrift. Does anyone have expierence with these coilovers and spring rates. Also if anyone has installation/spec for this coilover the tein USA site doesn't list it.

04-20-2006, 01:56 PM	#1
jmizell2 Join Date: Nov 2005 Location: Gainesville, FL Age: 69 Posts: 36 Trader Rating: (0) Feedback Score: 0 reviews	Tein HA spring rates for autocross I just bought a used set of tein HA and I need to send them in for rebuild which is a perfect time to revalve for heavier spring rates. Stock are 6/336 front and 5/280 rear. I was thinking of increasing the front/rear to 10/8 like the superdrift. Does anyone have expierence with these coilovers and spring rates. Also if anyone has installation/spec for this coilover the tein USA site doesn't list it. __________________ jmizell 240sx 1990 s13 with a 1998 s14 DOHC swap that I autocross.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode