sohc ps pump removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

2wo4orty · 08-11-2006, 02:33 AM

I'm just wondering if it is necessary to remove the ps pump pulley
in order to remove the the ps pump

I already loosened the tensioner bolt but the tension won't change at all

I also took out the bolts holding the pump to the brackets

any ideas on how to get it off

thanks

and i already did a search didnt really answer my question

http://www.zilvia.net/f/showthread.p...t=pump+removal

3day240sx · 08-11-2006, 12:45 PM

3 bolts behind the pulley. you use the holes in the pulley to get to them so you don't have to remove the pulley. on the tensioner you have to losen the nut in the center of it to let it move.

RightWheelDrive · 08-11-2006, 10:13 PM

^^Yuup...good luck.

08-11-2006, 02:33 AM	#1
2wo4orty Leaky Injector Join Date: Jan 2006 Location: Earth Posts: 87 Trader Rating: (1) Feedback Score: 1 reviews	sohc ps pump removal I'm just wondering if it is necessary to remove the ps pump pulley in order to remove the the ps pump I already loosened the tensioner bolt but the tension won't change at all I also took out the bolts holding the pump to the brackets any ideas on how to get it off thanks and i already did a search didnt really answer my question http://www.zilvia.net/f/showthread.p...t=pump+removal

08-11-2006, 10:13 PM	#3
RightWheelDrive Zilvia Member Join Date: May 2005 Location: cal-E-4-9-A Posts: 253 Trader Rating: (0) Feedback Score: 0 reviews	^^Yuup...good luck. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-11-2006, 12:45 PM	#2
3day240sx Leaky Injector Join Date: Aug 2006 Location: millington, TN Age: 39 Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	3 bolts behind the pulley. you use the holes in the pulley to get to them so you don't have to remove the pulley. on the tensioner you have to losen the nut in the center of it to let it move.