![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
S13 SR20det weird problem
Hey all, 1st time poster. anyway , on my SR, when i get out of VAC and into boost, the car seems like it is laborored and accelerates, but not as fast as it should be. (or so it seems) the revs do not seem to build as quickly when the car is under boost.
And when i begin to lift off the throttle, (throttle still depressed slightly, in VAC not boost) the revs begin to climb at a more accelerated rate then while in boost. My profec spec 2 says a good steady boost and my greddy gauge says a good steady boost too. Mods. Redtop SR Badly slipping clutch (could this be the problem?) T28 Boost controller (7psi) exhaust from turbo back HKS SSQV walbro 255 |
|
![]() |
![]() |
Sponsored Links |
![]() |
#4 |
OKay, Well the thing about the clutch is it slips very badly durring high RPM, but arround 2-3K when i begin to build boost the car almost seems labored.
I have boost leak tested my system from the hot pipe. and no leaks to 1.5Bar |
|
![]() |
![]() |
![]() |
#6 |
Also, i can rev it in neutral and if i rev it pretty high (i think over 5K) jabbing the throttle, it will get out of vacume and the boost gauge will meter very slight boost.
And no i have not pulled codes. |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|