Shaving JDM kouki front bumper license plate holder? larger IC cutout? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

az_240 · 03-16-2007, 05:10 PM

Has anyone done this or attempted it? Every JDM front bumper I see has that ugly license plate holder... here in AZ we dont need the front plate.

Is the bumper thick enough to just sand that part off and fill in the holes? Maybe reinforce it with some fiberglass from the back?

I was also thinking about making the middle hole slightly bigger for a FMIC by cutting it slightly kinda like what this guy did with the usdm front bumper>

I think it would look pretty sick with a gracer or maybe even cwest lip and usdm kouki sides... Has anyone seen this combo? I cant seem to find it. Are the usdm sides low enough for the gracer lip or cwest lip?

Dont want the OEM lip for the jdm bumper because it is waaaaay overpriced and hardly makes a difference

CKAMC · 03-16-2007, 08:12 PM

yeah you can cut out the license plate portion to make a replica hotroad front bumper (and a few other brands look like this).

if its the OEM jdm bumper then yes it can handle it since it is urethane we are talking about.

look thru the pic's thread and you will see what a few members have done to their oem 180 kouki front bumpers (three slotted and one large slot version)

anything is possible with a good body shop.

az_240 · 03-16-2007, 08:42 PM

I plan on doing this myself since Im not rich. And I dont want to make a slot like the 180sx guys do. Just want to make the hole slightly larger but round it off like the pic above. The two holes where the turn signals are would stay the same.

I just wanted to make sure the urethane was thick enough to handle the shaving of the raised license plate part. Someone with a jdm bumper told me it wouldnt work.

Still wondering about if those kouki sides would look right with the gracer front lip. The zenki jdm sides look like they arent low enough and I just dont like them.

98koukile · 03-16-2007, 09:15 PM

It's a USDM bumper, it's not from the Japanese Domestic Market. You can shave it off but its a lot of work and you better be good at it, maybe a little rienforcement needed.
The Zenki and Kouki have the same side skirts but it does depend if you actually mean JDM... the car in your picture has USDM sides. It would look okay with an aftermarket front

CKAMC · 03-16-2007, 09:20 PM

I just wouldnt do it myself honestly unless I was good at it thats my own point I have to say about that.

Dont want to do something and then hate yourself and see a bunch of $$$ go down the drain, unless you do have experience repairing or modifying urethane and fiberglass aero parts.

Good luck

az_240 · 03-16-2007, 09:35 PM

Quote:

Originally Posted by 98koukile

It's a USDM bumper, it's not from the Japanese Domestic Market. You can shave it off but its a lot of work and you better be good at it, maybe a little rienforcement needed.
The Zenki and Kouki have the same side skirts but it does depend if you actually mean JDM... the car in your picture has USDM sides. It would look okay with an aftermarket front

I dont see how it would be a lot of work... just take a belt sander or electric sander to it for a while then hand sand it till its smooth with the rest of the bumper. Then fill in the holes with flexible fiberglass. I havent seen anyone else do this so I was just wondering if it is within reason or if it would be too thin..

I might not actually try cutting the bumper to make the hole larger. I would like to to be different and I think it would look pretty good but THAT seems like it would be a lot of work.

flamebag16 · 03-17-2007, 02:58 PM

my car has it shaved also shaved the marker lights now has an intercooler in the bumper

az_240 · 03-17-2007, 06:42 PM

sexay for a usdm bumper... usually not a fan of them.

Saw kouki-kat's car had that shit shaved. I hope the kouki sides/jdm rear will look ok with that lip... the zenki ones just look funny to me.

projectRDM · 03-17-2007, 07:06 PM

Quote:

Originally Posted by 98koukile

It's a USDM bumper, it's not from the Japanese Domestic Market. You can shave it off but its a lot of work and you better be good at it, maybe a little rienforcement needed.
The Zenki and Kouki have the same side skirts but it does depend if you actually mean JDM... the car in your picture has USDM sides. It would look okay with an aftermarket front

US= United States.
JDM= Japan.

We all know this, your point makes no sense.

Zenki and Kouki do NOT have the same side skirts at all, and what that has to do with shaving the front bumper we may never know. We also won't know why you felt the need to point it out either.

az_240 · 03-17-2007, 07:20 PM

^haha was gona point that out... but forgot when I was making the post.

^here is the C west copy I found of mmb's car... looks pretty good besides the fact the sides of the lip do not extend all the way up to the turn signals like the greddy lip does. There is just that line that looks pretty ugly. Id be tempted to mold it but Id be worried of it cracking.

Most likely just go with the trust lip when the time comes.

s14er · 03-17-2007, 07:44 PM

here ya go!

projectRDM · 03-17-2007, 07:57 PM

^ Did you cut that with a fork?

*NemeGuero* · 03-17-2007, 09:48 PM

Looks more like a spoon job.

98koukile · 03-17-2007, 11:26 PM

Quote:

Originally Posted by R240NA

US= United States.
JDM= Japan.

We all know this, your point makes no sense.

Zenki and Kouki do NOT have the same side skirts at all, and what that has to do with shaving the front bumper we may never know. We also won't know why you felt the need to point it out either.

Well for one his picture showed a modified US bumper, therefore I was making sure he meant JDM and wasn't just mistaken

And secondly, again picture showed US sideskirts so I was making sure, and in his post that you obviously didn't read he asked if an aftermarket front lip would look good with the oem sideskirts.

You may want to be more literate before you bag on people...

Bryants95240sx · 03-18-2007, 12:32 AM

Man you could have just given me that bumper since you were gonna go and ruin it like that.

az_240 · 03-18-2007, 05:26 AM

Quote:

Originally Posted by NemeGuero

Looks more like a spoon job.

ahahaha

Yeah thanks for contributing but you should have at least made the hole even with the original hole

and not so high up. Im sure it can be done nicely but I dont think im the one to do it... so I think im not going to try cutting my bumper up.

projectRDM · 03-18-2007, 08:19 AM

Quote:

Originally Posted by 98koukile

Well for one his picture showed a modified US bumper, therefore I was making sure he meant JDM and wasn't just mistaken

And secondly, again picture showed US sideskirts so I was making sure, and in his post that you obviously didn't read he asked if an aftermarket front lip would look good with the oem sideskirts.

You may want to be more literate before you bag on people...

You might want to quit eating penis before posting period.

"cutting it slightly kinda like what this guy did with the usdm front bumper", taken directly from the top post. Literacy seems to have escaped you, not I.

98koukile · 03-18-2007, 09:06 PM

"I think it would look pretty sick with a gracer or maybe even cwest lip and usdm kouki sides... Has anyone seen this combo? I cant seem to find it. Are the usdm sides low enough for the gracer lip or cwest lip?"

Wait what was that? Not sure I heard you... hey look I can quote too
Do you even try helping people out on here or do you just get your jollies trying to show your infinite knowledge?

03-16-2007, 05:10 PM	#1
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	Shaving JDM kouki front bumper license plate holder? larger IC cutout? Has anyone done this or attempted it? Every JDM front bumper I see has that ugly license plate holder... here in AZ we dont need the front plate. Is the bumper thick enough to just sand that part off and fill in the holes? Maybe reinforce it with some fiberglass from the back? I was also thinking about making the middle hole slightly bigger for a FMIC by cutting it slightly kinda like what this guy did with the usdm front bumper> I think it would look pretty sick with a gracer or maybe even cwest lip and usdm kouki sides... Has anyone seen this combo? I cant seem to find it. Are the usdm sides low enough for the gracer lip or cwest lip? Dont want the OEM lip for the jdm bumper because it is waaaaay overpriced and hardly makes a difference

03-16-2007, 08:12 PM	#2
CKAMC Post Whore! Join Date: Mar 2004 Location: Desert Age: 38 Posts: 4,804 Trader Rating: (0) Feedback Score: 0 reviews	yeah you can cut out the license plate portion to make a replica hotroad front bumper (and a few other brands look like this). if its the OEM jdm bumper then yes it can handle it since it is urethane we are talking about. look thru the pic's thread and you will see what a few members have done to their oem 180 kouki front bumpers (three slotted and one large slot version) anything is possible with a good body shop. __________________

03-16-2007, 09:15 PM	#4
98koukile Zilvia Addict Join Date: Jan 2007 Location: Western Mass Age: 38 Posts: 949 Trader Rating: (3) Feedback Score: 3 reviews	It's a USDM bumper, it's not from the Japanese Domestic Market. You can shave it off but its a lot of work and you better be good at it, maybe a little rienforcement needed. The Zenki and Kouki have the same side skirts but it does depend if you actually mean JDM... the car in your picture has USDM sides. It would look okay with an aftermarket front __________________ Just talking about cars, one at a time Horsepower sells cars torque wins races -Shelby

03-16-2007, 09:20 PM	#5
CKAMC Post Whore! Join Date: Mar 2004 Location: Desert Age: 38 Posts: 4,804 Trader Rating: (0) Feedback Score: 0 reviews	I just wouldnt do it myself honestly unless I was good at it thats my own point I have to say about that. Dont want to do something and then hate yourself and see a bunch of $$$ go down the drain, unless you do have experience repairing or modifying urethane and fiberglass aero parts. Good luck __________________

03-17-2007, 09:48 PM	#13
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	Looks more like a spoon job. __________________

03-16-2007, 08:42 PM	#3
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	I plan on doing this myself since Im not rich. And I dont want to make a slot like the 180sx guys do. Just want to make the hole slightly larger but round it off like the pic above. The two holes where the turn signals are would stay the same. I just wanted to make sure the urethane was thick enough to handle the shaving of the raised license plate part. Someone with a jdm bumper told me it wouldnt work. Still wondering about if those kouki sides would look right with the gracer front lip. The zenki jdm sides look like they arent low enough and I just dont like them.

03-17-2007, 02:58 PM	#7
flamebag16 BANNED Join Date: Dec 2005 Location: texas Posts: 200 Trader Rating: (0) Feedback Score: 0 reviews	my car has it shaved also shaved the marker lights now has an intercooler in the bumper

03-17-2007, 06:42 PM	#8
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	sexay for a usdm bumper... usually not a fan of them. Saw kouki-kat's car had that shit shaved. I hope the kouki sides/jdm rear will look ok with that lip... the zenki ones just look funny to me.

03-17-2007, 07:20 PM	#10
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	^haha was gona point that out... but forgot when I was making the post. ^here is the C west copy I found of mmb's car... looks pretty good besides the fact the sides of the lip do not extend all the way up to the turn signals like the greddy lip does. There is just that line that looks pretty ugly. Id be tempted to mold it but Id be worried of it cracking. Most likely just go with the trust lip when the time comes.

03-17-2007, 07:44 PM	#11
s14er Zilvia Member Join Date: May 2005 Location: bay area Age: 40 Posts: 157 Trader Rating: (0) Feedback Score: 0 reviews	here ya go!

03-17-2007, 07:57 PM	#12
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	^ Did you cut that with a fork?

03-18-2007, 12:32 AM	#15
Bryants95240sx Zilvia Addict Join Date: Feb 2004 Location: alabama Age: 37 Posts: 668 Trader Rating: (0) Feedback Score: 0 reviews	Man you could have just given me that bumper since you were gonna go and ruin it like that. __________________

03-18-2007, 09:06 PM	#18
98koukile Zilvia Addict Join Date: Jan 2007 Location: Western Mass Age: 38 Posts: 949 Trader Rating: (3) Feedback Score: 3 reviews	"I think it would look pretty sick with a gracer or maybe even cwest lip and usdm kouki sides... Has anyone seen this combo? I cant seem to find it. Are the usdm sides low enough for the gracer lip or cwest lip?" Wait what was that? Not sure I heard you... hey look I can quote too Do you even try helping people out on here or do you just get your jollies trying to show your infinite knowledge? __________________ Just talking about cars, one at a time Horsepower sells cars torque wins races -Shelby

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode