300ZX brake rotors ques + wastegate ques - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

skylindrftr · 05-22-2007, 04:09 PM

ques 1: Will 300ZX rotors work with s13 silvia abs calipers (provided they are drilled for 4 lug)?

ques 2: Will a small crack below the wastegate hole on a t28 make spooling noticeably worse?

Thanks!

OptionZero · 05-22-2007, 04:53 PM

1. No
1a. What is so hard about using s13 calipers with s13 rotors or 300zx rotors and 300zx calipers?

*fliprayzin240sx* · 05-22-2007, 04:57 PM

Below the wastegate hole? compressor side? Wait lemme re-phrase that, the shiny side of the turbo or the non-shiny side of the turbo?

S13 brake rotors are too small for 300Z rotors...

skylindrftr · 05-22-2007, 05:39 PM

OptionZero, I am already running altima rotors with my s13 calipers, but my buddy gave me some predrilled 300zx front rotors for free but i haven't had the time to bolt them up yet jw...

fliprayzin240sx, there is no wastegate on the compressor side buddy =) Thanks anyhow

projectRDM · 05-22-2007, 09:54 PM

But you know for a fact that the 300ZX rotor is both larger in diameter and wider, so how do you propose to make it fit?

That's like asking if a 15" tire will fit on an 18" wheel, you know the shit won't work, why even bother asking?

steve shadows · 05-23-2007, 11:56 AM

Quote:

Originally Posted by skylindrftr

ques 2: Will a small crack below the wastegate hole on a t28 make spooling noticeably worse?

Thanks!

I wouldnt bolt any turbocharger into a car with any visible fissures...but hey its your life

got a pic?

skylindrftr · 05-23-2007, 03:04 PM

r240na: it is larger but the rotors I am using right now are still a bit small, they are smaller than 180sx/s13 sil rotors and my buddy gave me some 300zx ones and said mabye they will work mabye they wont...

Steve shadows: I talked to a guy where my buddy works at a machine shop and he said it i wont lose enough exhaust gas through it to noticeably affect response. Here's a pic:

OptionZero · 05-23-2007, 03:16 PM

your friend is an idiot, and you're only a little farther behind
how hard is it to get replacement s13 rotors, some fools in socal would probably give you some decent condition ones for free

skylindrftr · 05-23-2007, 05:19 PM

Look I didn't ask to be insulted I don't see what your problem is, a simple yes or no would have done. I got these rotors for free, so I was jw. This forum is a lot hostile than I remembered it. Also the rotors that would be ideal for this setup are the real s13 silvia/180sx (not 240sx) front rotors.

MomentumGT · 05-23-2007, 05:30 PM

Quote:

Originally Posted by skylindrftr

r240na: it is larger but the rotors I am using right now are still a bit small, they are smaller than 180sx/s13 sil rotors and my buddy gave me some 300zx ones and said mabye they will work mabye they wont...

Steve shadows: I talked to a guy where my buddy works at a machine shop and he said it i wont lose enough exhaust gas through it to noticeably affect response. Here's a pic:

Doesn't look like the crack or scratch would do you any notice. To me I think you're good.

-Jon

skylindrftr · 05-23-2007, 05:52 PM

Thanks, it's just that little crack right there and it wraps a teeny bit under the wastegate on both sides.

misfitsfreak81 · 05-26-2007, 06:57 AM

cracks are bad on the any side of a turbo. especially the turbine side. your spool up will be bad and the crack will only get bigger the hotter the turbine gets. and they get hella hot, enough to melt flesh instantly. trust me i know first hand. second, the 300zx rotors will only work with 300zx calipers. they are way larger diameter and also much thicker than the stock s13 rotors. so no they wont work. sorry that every one is hostile, but the rotor question is very basic common sense. just to clarify, the 300zx rotors will work on an s13/s14 but you must have the matching 300zx calipers. (ie. 26mm rotor & caliper or 30mm rotor & caliper) hope this helps you out

91rps13 · 05-26-2007, 08:41 AM

Quote:

cracks are bad on the any side of a turbo. especially the turbine side. your spool up will be bad and the crack will only get bigger the hotter the turbine gets. and they get hella hot, enough to melt flesh instantly. trust me i know first hand. second, the 300zx rotors will only work with 300zx calipers. they are way larger diameter and also much thicker than the stock s13 rotors. so no they wont work. sorry that every one is hostile, but the rotor question is very basic common sense. just to clarify, the 300zx rotors will work on an s13/s14 but you must have the matching 300zx calipers. (ie. 26mm rotor & caliper or 30mm rotor & caliper) hope this helps you out

+1. on a side note uf you got free rotors why not think about upgrading to z32 calipers??

skylindrftr · 05-29-2007, 04:59 PM

Well I have considered z32 calipers but I have been dealing with turbo issues lately and found out that I need a new compressor o-ring seal as well, anyone know if it possible to seal this crack in the turbine?

05-22-2007, 04:09 PM	#1
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	300ZX brake rotors ques + wastegate ques ques 1: Will 300ZX rotors work with s13 silvia abs calipers (provided they are drilled for 4 lug)? ques 2: Will a small crack below the wastegate hole on a t28 make spooling noticeably worse? Thanks!

05-22-2007, 04:57 PM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Below the wastegate hole? compressor side? Wait lemme re-phrase that, the shiny side of the turbo or the non-shiny side of the turbo? S13 brake rotors are too small for 300Z rotors... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

05-22-2007, 09:54 PM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	But you know for a fact that the 300ZX rotor is both larger in diameter and wider, so how do you propose to make it fit? That's like asking if a 15" tire will fit on an 18" wheel, you know the shit won't work, why even bother asking? __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-22-2007, 04:53 PM	#2
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 41 Posts: 6,263 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	1. No 1a. What is so hard about using s13 calipers with s13 rotors or 300zx rotors and 300zx calipers?

05-22-2007, 05:39 PM	#4
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	OptionZero, I am already running altima rotors with my s13 calipers, but my buddy gave me some predrilled 300zx front rotors for free but i haven't had the time to bolt them up yet jw... fliprayzin240sx, there is no wastegate on the compressor side buddy =) Thanks anyhow

05-23-2007, 03:04 PM	#7
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	r240na: it is larger but the rotors I am using right now are still a bit small, they are smaller than 180sx/s13 sil rotors and my buddy gave me some 300zx ones and said mabye they will work mabye they wont... Steve shadows: I talked to a guy where my buddy works at a machine shop and he said it i wont lose enough exhaust gas through it to noticeably affect response. Here's a pic:

05-23-2007, 03:16 PM	#8
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 41 Posts: 6,263 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	your friend is an idiot, and you're only a little farther behind how hard is it to get replacement s13 rotors, some fools in socal would probably give you some decent condition ones for free

05-23-2007, 05:19 PM	#9
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	Look I didn't ask to be insulted I don't see what your problem is, a simple yes or no would have done. I got these rotors for free, so I was jw. This forum is a lot hostile than I remembered it. Also the rotors that would be ideal for this setup are the real s13 silvia/180sx (not 240sx) front rotors.

05-23-2007, 05:52 PM	#11
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	Thanks, it's just that little crack right there and it wraps a teeny bit under the wastegate on both sides.

05-26-2007, 06:57 AM	#12
misfitsfreak81 Zilvia Junkie Join Date: Dec 2005 Location: northern suck Posts: 354 Trader Rating: (1) Feedback Score: 1 reviews	cracks are bad on the any side of a turbo. especially the turbine side. your spool up will be bad and the crack will only get bigger the hotter the turbine gets. and they get hella hot, enough to melt flesh instantly. trust me i know first hand. second, the 300zx rotors will only work with 300zx calipers. they are way larger diameter and also much thicker than the stock s13 rotors. so no they wont work. sorry that every one is hostile, but the rotor question is very basic common sense. just to clarify, the 300zx rotors will work on an s13/s14 but you must have the matching 300zx calipers. (ie. 26mm rotor & caliper or 30mm rotor & caliper) hope this helps you out

05-29-2007, 04:59 PM	#14
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 36 Posts: 1,099 Trader Rating: (26) Feedback Score: 26 reviews	Well I have considered z32 calipers but I have been dealing with turbo issues lately and found out that I need a new compressor o-ring seal as well, anyone know if it possible to seal this crack in the turbine?