![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Leaky Injector
![]() |
crazy temp gauge..
i was just curious if my thermostat was going bad.. when i floor my car my temp gauge goes down to cold.. then back up to the middle when i let go.. anyone else have this issue? any recommendations?
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Post Whore!
![]() Join Date: Mar 2004
Location: Desert
Age: 38
Posts: 4,804
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
stock guage or aftermarket? stock location of temp sensor or on top rad hose?
come on you need to put a little more info if you want some sort of help
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Zilvia Junkie
![]() |
does it drop down fast or does it go down slow? i've had similar problems after getting an aftermarket radiator. replaced thermostat, no problem after.
could be sensor if the needle plummets quickly.
__________________
NASA PTD/SCCA ITS |
![]() |
![]() |
![]() |
#5 |
Leaky Injector
![]() |
yeah it's the stock gauge.. and i do have a koyo allum.. it does drop down fast when i floor the gas or when it builds up boost, so should i replace my thermostat with an aftermarket one or will a stock one be fine?
|
![]() |
![]() |
![]() |
#6 |
Zilvia Junkie
![]() |
stock one is fine. check your overflow bottle as well and make sure there are no cracks.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|