SR smic w/ shroud points to where?

[Neejay]

I have a perfect condition sr smic with the stock shroud still on it. Now I know it mounts at an angle, but where does the shroud pull air from?

Reason Im asking is because I have a jdm zenki bumper with the hole for smic, and my stock oem chuki with the grilles (on the car). I know its just a smic, but whats better: oem chuki bumper or jdm zenki bumper with side hole?

[Neejay]

thought it was an easy question

[Luvs2slide]

Originally Posted by Neejay

I have a perfect condition sr smic with the stock shroud still on it. Now I know it mounts at an angle, but where does the shroud pull air from?

Reason Im asking is because I have a jdm zenki bumper with the hole for smic, and my stock oem chuki with the grilles (on the car). I know its just a smic, but whats better: oem chuki bumper or jdm zenki bumper with side hole?

Both will work. If you use the chuki bumper, I would take out the grill for more air though.

[Neejay]

Originally Posted by Luvs2slide

Both will work. If you use the chuki bumper, I would take out the grill for more air though.

Gotcha. But does the shroud point more towards the grille or just some random spot? I would think there was a reason it was angled like that

[Luvs2slide]

When I had it on my car, It pointed in the direction of the grill. I had a OEM zenki bumper and OEM chuki on there. They both ALWAYS pointed to the grill. HTH.

[TheTimanator]

if you have a jdm zenki bumper with the hole for smic then the shroud should line up with the hole. Make sense? The shroud or duct is designed to take air in through that hole in the bumper and direct to the intercooler.

for whatever reason, I had to trim mine b/c it poked through. Don't know why though.

PS - if you ever want to sell that JDM S13 zenki bumper let me know

[Neejay]

Originally Posted by TheTimanator

if you have a jdm zenki bumper with the hole for smic then the shroud should line up with the hole. Make sense? The shroud or duct is designed to take air in through that hole in the bumper and direct to the intercooler.

for whatever reason, I had to trim mine b/c it poked through. Don't know why though.

PS - if you ever want to sell that JDM S13 zenki bumper let me know

Gotcha. What bumper were you using? I wasn't sure if there were different year smic's or if the shrouds were bumper specific or what. If it will point directly to the grille of my usdm chuki bumper, I might as well just keep it (especially since I just got my brand new jdm amber/clears )

[RedtopTech]

get your lazy butt under there and find out!

[Neejay]

Originally Posted by RedtopTech

get your lazy butt under there and find out!

lol...yeah, believe it or not, I didn't even think about doing that until AFTER I posted this thread. It has more to do with the smic being at my mom's house, and not readily available to just test it.

As much as I hate to admit it...