![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
Join Date: May 2007
Location: New Mexico
Age: 44
Posts: 15
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Could this cause me to run lean?
I dyno'd my 240 the other day and I was in the mid to low 13's on afr's. I have a redtop sr20det and I just realized today that the vacuum source had come off of my fuel pressure regulator. I was running 12psi and I was lean the whole way. It got a little better as the rpm's went up but still pretty lean. Would that vacuum source have caused me to run lean?
I have an upgraded front mount intercooler and a walbro 255 pump and 12psi. Everything else is pretty much stock. I dyno'd 230rwhp corrected, but Im over 5000ft. above sea level so my actual power was 188rwhp. There is no way I should be out of fuel at 190rwhp, right? |
![]() |
![]() |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|