Map sensor location. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drftmark · 01-10-2008, 10:23 PM

Where is everyone who runs a standalone with a map sensor putting the map sensor and running the vacuum line to?

jspaeth · 01-11-2008, 08:03 AM

Um manifold..............?

I feel like this is rhetorical

the head · 01-11-2008, 11:03 AM

Running Haltech E6X with 4bar Gm map sensor

My MAP is mounted to the firewall on the passenger side above the pinch weld right next to my UEGO translator box tapped hole in manifold for pressure reading

Koopa Troopa · 01-11-2008, 12:53 PM

My MAP is in the sub injector hole in the cold pipe... No vacuum line is going to it as the sensor is electronic.

MA JasonG · 01-11-2008, 02:17 PM

Running Apexi PFC and its in the Greddy Manifold.

drftmark · 01-11-2008, 10:32 PM

Quote:

Originally Posted by jspaeth

Um manifold..............?

I feel like this is rhetorical

Well ya the manifold... I meant WHERE on the manifold. Sorry for the confusion.

jspaeth · 01-11-2008, 10:42 PM

Oh I simply assumed that one should run a vacuum line off the intake mani to the sensor, but I guess it depends what kind of sensor it is.

drftmark · 01-11-2008, 11:15 PM

Ya sorry its a haltech e8.

fakts13 · 01-12-2008, 01:38 AM

if your map sensor has a nipple for a vacuum line use any available vacuum port on the manifold and mount the sensor where you have room.

01-10-2008, 10:23 PM	#1
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	Map sensor location. Where is everyone who runs a standalone with a map sensor putting the map sensor and running the vacuum line to?

01-11-2008, 08:03 AM	#2
jspaeth Nissanaholic! Join Date: Mar 2006 Location: Philadelphia suburbs Age: 40 Posts: 2,347 Trader Rating: (7) Rides Gallery: jspaeth Feedback Score: 7 reviews	Um manifold..............? I feel like this is rhetorical __________________ Daily driven

01-11-2008, 11:03 AM	#3
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 2,164 Trader Rating: (3) Feedback Score: 3 reviews	Running Haltech E6X with 4bar Gm map sensor My MAP is mounted to the firewall on the passenger side above the pinch weld right next to my UEGO translator box tapped hole in manifold for pressure reading __________________ I never knew you could do that with an eggplant Last edited by the head; 01-11-2008 at 03:40 PM..

01-11-2008, 12:53 PM	#4
Koopa Troopa Post Whore! Join Date: Sep 2006 Location: 北谷著, 沖縄県、日本 Posts: 2,565 Trader Rating: (3) Feedback Score: 3 reviews	My MAP is in the sub injector hole in the cold pipe... No vacuum line is going to it as the sensor is electronic. __________________ Buy my Stillway shifter!

01-11-2008, 10:42 PM	#7
jspaeth Nissanaholic! Join Date: Mar 2006 Location: Philadelphia suburbs Age: 40 Posts: 2,347 Trader Rating: (7) Rides Gallery: jspaeth Feedback Score: 7 reviews	Oh I simply assumed that one should run a vacuum line off the intake mani to the sensor, but I guess it depends what kind of sensor it is. __________________ Daily driven

01-11-2008, 02:17 PM	#5
MA JasonG Zilvia Member Join Date: Jan 2008 Location: Orlando Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	Running Apexi PFC and its in the Greddy Manifold.

01-11-2008, 11:15 PM	#8
drftmark Zilvia Junkie Join Date: Nov 2005 Location: tx Posts: 524 Trader Rating: (5) Feedback Score: 5 reviews	Ya sorry its a haltech e8.

01-12-2008, 01:38 AM	#9
fakts13 Zilvia Member Join Date: May 2003 Location: socal Posts: 245 Trader Rating: (0) Feedback Score: 0 reviews	if your map sensor has a nipple for a vacuum line use any available vacuum port on the manifold and mount the sensor where you have room.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode