Need some wiring pin outs please - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

outlaw9958 · 02-18-2008, 02:59 PM

Ok I have a red top SR and I am using a N60 maf. I have a AFC NEO for re-tuning. I need to know how to wire the N60 in to the SR harness. I have been looking all over every forum from Nico to FRsports and no one has a write up on how to do this. Thanks for your help in advance!!

outlaw9958 · 02-18-2008, 06:06 PM

Any one have an idea

chibo · 02-18-2008, 06:23 PM

http://www.zilvia.net/f/showthread.p...axima+maf+wire
and

Quote:

The maxima plug has 6 pins instead of 4 like the KA. Pins are,
A= Blank (not used)
B= Signal wire (white)
C= Ground in engine bay
D= Ground wire (black)
E= 12v wire (black/white stripe)
F= Blank (not used)

That should be all you need.

02-18-2008, 02:59 PM	#1
outlaw9958 Zilvia Member Join Date: Nov 2001 Location: Knoxville, TN Posts: 162 Trader Rating: (2) Feedback Score: 2 reviews	Need some wiring pin outs please Ok I have a red top SR and I am using a N60 maf. I have a AFC NEO for re-tuning. I need to know how to wire the N60 in to the SR harness. I have been looking all over every forum from Nico to FRsports and no one has a write up on how to do this. Thanks for your help in advance!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-18-2008, 06:06 PM	#2
outlaw9958 Zilvia Member Join Date: Nov 2001 Location: Knoxville, TN Posts: 162 Trader Rating: (2) Feedback Score: 2 reviews	Any one have an idea