redtop O2 sensor wiring question for universal O2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

chibich · 03-17-2008, 08:41 PM

I have a couple things to finish up on my swap and might finally have a chance to be back in town this weekend and work on it. I was wondering if I could possible just get a universal O2 sensor and wire that into the jdm harness for my redtop, cause the O2 sensor that came with the motor has a large dent in it and don't want to have to weld in a bung if it is broken and I could just replace it with a universal one. Anyone done this or do I have to go with another jdm O2 sensor?

Sileighty_85 · 03-17-2008, 08:46 PM

Here
http://www.thenismoshop.com/ikorb.ph...roduct_id=1607

chibich · 03-17-2008, 09:11 PM

so you can't use a universal one from advanced or napa?

Sileighty_85 · 03-17-2008, 11:13 PM

I believe one from a 1987 280ZX will work

g6civcx · 03-18-2008, 06:57 AM

Search my posts for o2 sensor. Everybody else who is clueless shouldn't respond.

SHIFT_*grind* · 03-18-2008, 07:54 AM

I went through a lot of problems with this as well, and have a bunch of posts on the topic.

breakingsociety · 03-20-2008, 11:30 PM

easy solution - http://cgi.ebay.com/ebaymotors/New-N...spagenameZWD1V
I JUST bought that. it works well. spliced it into my harness. good luck!

03-17-2008, 08:41 PM	#1
chibich Leaky Injector Join Date: Oct 2007 Location: richmond Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	redtop O2 sensor wiring question for universal O2 I have a couple things to finish up on my swap and might finally have a chance to be back in town this weekend and work on it. I was wondering if I could possible just get a universal O2 sensor and wire that into the jdm harness for my redtop, cause the O2 sensor that came with the motor has a large dent in it and don't want to have to weld in a bung if it is broken and I could just replace it with a universal one. Anyone done this or do I have to go with another jdm O2 sensor?

03-17-2008, 08:46 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Here http://www.thenismoshop.com/ikorb.ph...roduct_id=1607 __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-17-2008, 11:13 PM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	I believe one from a 1987 280ZX will work __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-18-2008, 07:54 AM	#6
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	I went through a lot of problems with this as well, and have a bunch of posts on the topic. __________________ My seller review thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2008, 09:11 PM	#3
chibich Leaky Injector Join Date: Oct 2007 Location: richmond Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	so you can't use a universal one from advanced or napa?

03-18-2008, 06:57 AM	#5
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Search my posts for o2 sensor. Everybody else who is clueless shouldn't respond.

03-20-2008, 11:30 PM	#7
breakingsociety Leaky Injector Join Date: Mar 2007 Location: West Palm Beach Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	easy solution - http://cgi.ebay.com/ebaymotors/New-N...spagenameZWD1V I JUST bought that. it works well. spliced it into my harness. good luck!