Maximum tire size on stock s14 rolled fenders with 18x10 wheel ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BILLYhoang · 03-25-2008, 07:56 PM

Wassup zilvia , I did a search on this but most of the answers were relating to the rear setup .

My question is , what is maximum tire size someone has run on a 18x10 wheel up front with stock rolled fenders on a s14 ?

If it matters , the offset is between around +3 .

-Billy

i need tires · 03-25-2008, 08:00 PM

ive seen people run 17x10 +12 FNsd on front with a 235/40 tire

so with you having a slightly more aggressive offset i would say a 225/40 or 45 should do ya good!

BILLYhoang · 03-25-2008, 09:57 PM

Maximum .... like 265s in the front .

McRussellPants · 03-25-2008, 10:00 PM

295s IIRC.

The cars pretty beat looking though.

S14 front fenders get wider the more ugly the get. total nissan hocus pocus.

BILLYhoang · 03-26-2008, 11:24 AM

is 275-40-18 out of the question ? for the front

*AceInHole* · 03-26-2008, 11:30 AM

285/30/R18 on 18x10 +20. Stock metal fender with lots of rolling, pulling, hammering:

scottleone · 03-26-2008, 11:34 AM

it's all depending on how much work you want to do you can get all the way up to a 335/30R18 depending on how much work you want to do, and how much money you have. the tire itself is 13.2 in. wide so it's not impossible to mount on a 10 in. wheel. cost is deffinetly a factor though, i would wholesale those for somewhere around $295.00 a tire, and i can imagine what dealer markup would be.

a_ahmed · 03-26-2008, 11:49 AM

285/30/18 ftw aceinthehole

I hate s14 owners, so much easier for you to fit....

check my maximum rubber wheel fitment thread for some ideas...

gotta240 · 03-26-2008, 01:16 PM

You guys all fail at reading......

STOCK ROLLED FENDER. Meaning... No hammer, no puller, no bat, no shoe, no newspaper, etc.

Also meaning the OP is FUCKED because a 10 +3 wheel will not fit for SHIT with merely a rolled fender... Well, unless you do some bullshit 215 tire which totally defeats such a wheel up front.

Moral of the story.

1. Zilvia cant read for jack shit.

2. OP is fucked

3. I'm still jealous over acinhole's tires.

03-25-2008, 07:56 PM	#1
BILLYhoang Zilvia Junkie Join Date: Jan 2007 Location: new jersey Age: 41 Posts: 468 Trader Rating: (6) Feedback Score: 6 reviews	Maximum tire size on stock s14 rolled fenders with 18x10 wheel ? Wassup zilvia , I did a search on this but most of the answers were relating to the rear setup . My question is , what is maximum tire size someone has run on a 18x10 wheel up front with stock rolled fenders on a s14 ? If it matters , the offset is between around +3 . -Billy

03-25-2008, 08:00 PM	#2
i need tires Zilvia FREAK! Join Date: Dec 2005 Location: Chandler, Az Age: 38 Posts: 1,056 Trader Rating: (1) Feedback Score: 1 reviews	ive seen people run 17x10 +12 FNsd on front with a 235/40 tire so with you having a slightly more aggressive offset i would say a 225/40 or 45 should do ya good! __________________ JadeCantDrift Blogspot

03-26-2008, 11:30 AM	#6
AceInHole Autox Technician Join Date: Dec 2001 Location: New Haven, CT Age: 44 Posts: 3,961 Trader Rating: (0) Rides Gallery: AceInHole Feedback Score: 0 reviews	285/30/R18 on 18x10 +20. Stock metal fender with lots of rolling, pulling, hammering: __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2008, 09:57 PM	#3
BILLYhoang Zilvia Junkie Join Date: Jan 2007 Location: new jersey Age: 41 Posts: 468 Trader Rating: (6) Feedback Score: 6 reviews	Maximum .... like 265s in the front .

03-25-2008, 10:00 PM	#4
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	295s IIRC. The cars pretty beat looking though. S14 front fenders get wider the more ugly the get. total nissan hocus pocus.

03-26-2008, 11:24 AM	#5
BILLYhoang Zilvia Junkie Join Date: Jan 2007 Location: new jersey Age: 41 Posts: 468 Trader Rating: (6) Feedback Score: 6 reviews	is 275-40-18 out of the question ? for the front

03-26-2008, 11:34 AM	#7
scottleone Zilvia Member Join Date: Dec 2005 Location: Connecticut Age: 42 Posts: 242 Trader Rating: (0) Feedback Score: 0 reviews	it's all depending on how much work you want to do you can get all the way up to a 335/30R18 depending on how much work you want to do, and how much money you have. the tire itself is 13.2 in. wide so it's not impossible to mount on a 10 in. wheel. cost is deffinetly a factor though, i would wholesale those for somewhere around $295.00 a tire, and i can imagine what dealer markup would be.

03-26-2008, 11:49 AM	#8
a_ahmed BANNED Join Date: Mar 2006 Location: Oakville, Ontario Posts: 749 Trader Rating: (0) Rides Gallery: a_ahmed Feedback Score: 0 reviews	285/30/18 ftw aceinthehole I hate s14 owners, so much easier for you to fit.... check my maximum rubber wheel fitment thread for some ideas...

03-26-2008, 01:16 PM	#9
gotta240 Post Whore! Join Date: Dec 2005 Location: so cal Posts: 3,496 Trader Rating: (21) Feedback Score: 21 reviews	You guys all fail at reading...... STOCK ROLLED FENDER. Meaning... No hammer, no puller, no bat, no shoe, no newspaper, etc. Also meaning the OP is FUCKED because a 10 +3 wheel will not fit for SHIT with merely a rolled fender... Well, unless you do some bullshit 215 tire which totally defeats such a wheel up front. Moral of the story. 1. Zilvia cant read for jack shit. 2. OP is fucked 3. I'm still jealous over acinhole's tires.