WTB new rb25det trans clutch slave cylinder - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Full-Lock · 06-09-2008, 09:56 PM

anyone got one?
interchangeable with any other nissans?

i need the 2 bolt holes under the cylinder side by side
only clutch slave cylinders i can find are the ones that have a bolt hole on top, then actual cylinder, then another bolt hold on the bottom.

thansk!!

SleeperSx · 06-10-2008, 08:02 AM

NAPA Part # 37487

Only 16$ I think total, Works Perfect, I run this slave on a Twin plate Cusco Exedy clutch, So you should not have any problems.

When you get the slave you will have to Drill the 2 bolt holes out to a accept a bigger bolt. But that takes 5 mins LOL.

SleeperSx · 06-10-2008, 08:14 AM

This is the difference.

Full-Lock · 06-10-2008, 09:10 AM

thanks a lot. ill be doing this today.

i take it the one on the right is the new slave from napa?
after i drill out the holes a bit everything lines up on the housing then? the mounting holes on the napa slave look further apart.

SleeperSx · 06-11-2008, 05:50 AM

Ya the one on the right is the Napa slave. Everything lined right up on mine. Just don't tighten the slave down too hard or you will bust the ears off it. I already done 1 like that. But its a simple swap.

Full-Lock · 06-11-2008, 10:34 AM

yea alright cool. ordered it yesterday since it was out o fstock at napa in town here. should be here today sometime

thanks again

SleeperSx · 06-14-2008, 06:55 AM

no problem, any more questions just let me know.

imotion s14 · 06-14-2008, 11:39 AM

tsc tsc too late but for future reference..

http://www.nismoparts.com/catalog/?section=824#1726

06-10-2008, 09:10 AM	#4
Full-Lock Nissanaholic! Join Date: Aug 2006 Location: ILLinois Posts: 1,765 Trader Rating: (0) Rides Gallery: Full-Lock Feedback Score: 0 reviews	thanks a lot. ill be doing this today. i take it the one on the right is the new slave from napa? after i drill out the holes a bit everything lines up on the housing then? the mounting holes on the napa slave look further apart. __________________

06-11-2008, 10:34 AM	#6
Full-Lock Nissanaholic! Join Date: Aug 2006 Location: ILLinois Posts: 1,765 Trader Rating: (0) Rides Gallery: Full-Lock Feedback Score: 0 reviews	yea alright cool. ordered it yesterday since it was out o fstock at napa in town here. should be here today sometime thanks again __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2008, 09:56 PM	#1
Full-Lock Nissanaholic! Join Date: Aug 2006 Location: ILLinois Posts: 1,765 Trader Rating: (0) Rides Gallery: Full-Lock Feedback Score: 0 reviews	WTB new rb25det trans clutch slave cylinder anyone got one? interchangeable with any other nissans? i need the 2 bolt holes under the cylinder side by side only clutch slave cylinders i can find are the ones that have a bolt hole on top, then actual cylinder, then another bolt hold on the bottom. thansk!! __________________

06-10-2008, 08:02 AM	#2
SleeperSx Leaky Injector Join Date: May 2008 Location: SpringTown Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	NAPA Part # 37487 Only 16$ I think total, Works Perfect, I run this slave on a Twin plate Cusco Exedy clutch, So you should not have any problems. When you get the slave you will have to Drill the 2 bolt holes out to a accept a bigger bolt. But that takes 5 mins LOL.

06-10-2008, 08:14 AM	#3
SleeperSx Leaky Injector Join Date: May 2008 Location: SpringTown Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	This is the difference.

06-11-2008, 05:50 AM	#5
SleeperSx Leaky Injector Join Date: May 2008 Location: SpringTown Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	Ya the one on the right is the Napa slave. Everything lined right up on mine. Just don't tighten the slave down too hard or you will bust the ears off it. I already done 1 like that. But its a simple swap.

06-14-2008, 06:55 AM	#7
SleeperSx Leaky Injector Join Date: May 2008 Location: SpringTown Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	no problem, any more questions just let me know.

06-14-2008, 11:39 AM	#8
imotion s14 Zilvia Addict Join Date: Mar 2006 Location: Houston, TX Age: 44 Posts: 713 Trader Rating: (5) Feedback Score: 5 reviews	tsc tsc too late but for future reference.. http://www.nismoparts.com/catalog/?section=824#1726