Car wont start after taking emission stuff off - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tuner92 · 08-29-2008, 09:05 PM

So I just had my head rebuilt on my ka24de, and win the head and the intake was off I took all the emission stuff off that you don’t need. And thin i put every thing back together and plugged all the vacuum lines. Thin I tried to start it and it wont start I checked timing and went back over every thing to make sure every thing is hooked up right and it still wont start. And it has spark and gas and compression.
So if anyone can give me any ideas or anything I could have missed doing.
Any help will be grate thanks andy

08-29-2008, 09:05 PM	#1
tuner92 Leaky Injector Join Date: May 2008 Location: illinois Age: 35 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Car wont start after taking emission stuff off So I just had my head rebuilt on my ka24de, and win the head and the intake was off I took all the emission stuff off that you don’t need. And thin i put every thing back together and plugged all the vacuum lines. Thin I tried to start it and it wont start I checked timing and went back over every thing to make sure every thing is hooked up right and it still wont start. And it has spark and gas and compression. So if anyone can give me any ideas or anything I could have missed doing. Any help will be grate thanks andy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode