Sohc cut off 2500rmp - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s13 @ fullboost · 10-18-2008, 12:39 PM

So Last night I decided that my fan shroud should come off because my fan was cutting into it. After its off all said and done a took all the lines that used to sit on top of the fan shroud and zip tied them but not tight they can still move around I did it just enough so they wont get hit by that fan and they sit right under the intake. I reassemble everything fire the motor up and It idles for like a couple of seconds and dies so then I give it gas as soon as you get to twenty five it cuts out and will not let me go any higher. Please help need to get to work =/

10-18-2008, 12:39 PM	#1
s13 @ fullboost Post Whore! Join Date: Dec 2007 Location: St.Petersburg,FL Posts: 2,550 Trader Rating: (15) Feedback Score: 15 reviews	Sohc cut off 2500rpm So Last night I decided that my fan shroud should come off because my fan was cutting into it. After its off all said and done a took all the lines that used to sit on top of the fan shroud and zip tied them but not tight they can still move around I did it just enough so they wont get hit by that fan and they sit right under the intake. I reassemble everything fire the motor up and It idles for like a couple of seconds and dies so then I give it gas as soon as you get to twenty five it cuts out and will not let me go any higher. Please help need to get to work =/ __________________ Last edited by s13 @ fullboost; 10-18-2008 at 02:11 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode