OH F/S:95 240sx shell and built sr20 partout - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nxpoweredsr20 · 01-08-2009, 09:11 PM

Im parting out my 95 240sx and the fully built sr20. The shell is rust free and has a clear title. It will not come with the hood(sold), sterio system, speakers, or lights.
It had some imperfections(included in pics) Will come with the wheels, tokico struts w/skunk 2 lowering springs and walbro fuel pump. Car has a new windshield and newly tinted windows.
Shell sold
zenki head lights w/hids 130
black rear seat 75
kouki tail lights 275
shift trim and boot 60
sparco steering wheel 150

The motor was fully built just under 5 thousand miles ago. It had timing problems so I disassembled it to change the timing chain and decided to try something new.
The block is .020 overbored and has a comp. ratio of 9:1. It will come with je pistons, eagle rods, stock crank and acl race bearings. There is a small chip out of the block from the upper oil pan bolt cracking through due to silicone buildup. It is all external and there is no leaks. (in pics) sold
Sr20det transmission great shifts new throwout bearing 300

I also have a fully built s14 head for 600 complete or I can part it out if there is enough intrest:
Head250
Brian crower stage 2 cams250
Supertech valvesprings and retainers offer
Rocker arms offer
NEW oem lifters 275
valvesoffer

Now for everything else:
Oil pump sold
Water pump30
Oil pickup25
ARP headstudssold
Apexi head gasket 1k miles on it sold
Greddy oil pan with recirculating catch can 400
Blitz dual sbc boost controller250
B&M short shifter sold
HKS 740cc injectors430
Alternator 100
Nismo motor mounts100
S14 manual non abs drive shaft sold
S14-S14 wiring harness(missing maf plug)100
Exhaust and intake manifold gaskets 15 each
S14 zenki Power fc d getro w/all sensors and harnessessold
Tomei spark plug cover sold
Coil packs75
Garret t3 turbo (ar63 hot side, 70coldside 4 bolt flange)NO SHAFTPLAY 450
Treadstone performance top mount manifold and dump pipe(4 bolt flange) 250

I have all the receipts for the motor build and machine shop work if needed. All items are sold AS IS. All the prices are obo I need this stuff gone so pm me, txt me at 5136460999, or email me at [email protected] .
TRADES:
Rb25 motorset and mounting equipment for 240(driveshaft and motor mounts)
Rb25det radiator
Rb25det intercooler
S13 shell ( no rust good body condition)
S14 dd

Here is a few pictures but more are located at:
nxpoweredsr20/car for sale - Photobucket - Video and Image Hosting

TrIpLe "D" · 01-08-2009, 09:16 PM

will the s14 drive shaft work with vlsd and will u ship?

nxpoweredsr20 · 01-08-2009, 09:18 PM

i can ship it might be a lil pricy but yes i used it with my j30 diff

TrIpLe "D" · 01-08-2009, 09:46 PM

how much shiped to 63114 send pm

silviakid2790 · 01-08-2009, 09:51 PM

that a gt35r?

nxpoweredsr20 · 01-08-2009, 09:56 PM

the size is comparable but its only oil cooled not a dual bb....its good for 500 hp made 300whp on 13lbs of boost

jr_ss · 01-08-2009, 10:37 PM

Pictures of the Greddy oil pan with recirc'd can catch please..

nxpoweredsr20 · 01-09-2009, 08:00 PM

pictures are located in photobucket but i will pm you some pictures

Xclusive_racer · 01-10-2009, 01:31 AM

Still have the motor? Is it a S14 motor or S13?

shoes59 · 01-10-2009, 09:04 AM

Interested in the Tomei Spark Plug Cover. $75 shipped to upstate NY 14450? Please reply with Paypal address.

nxpoweredsr20 · 01-10-2009, 09:23 AM

[email protected]

shoes59 · 01-10-2009, 10:04 AM

Quote:

Originally Posted by nxpoweredsr20

[email protected]

Paypal sent for the spark plug cover.

shoes59 · 01-10-2009, 02:13 PM

Quote:

Originally Posted by nxpoweredsr20

[email protected]

Do you have the interior door panels?

s14kozenki · 01-10-2009, 02:04 PM

wondering if you're selling the rims?
[email protected]

nxpoweredsr20 · 01-10-2009, 04:20 PM

no sorry both the rims and interior door panels are going with the shell

S14TEENZ · 01-10-2009, 04:27 PM

front bumper shipped to 20781??
sellin skirts??

thanks

nxpoweredsr20 · 01-10-2009, 05:24 PM

body kit is also going with the shell its just off from towing it

Impact Black · 01-12-2009, 12:36 PM

You should recieve the paypal for the shifter today.

nxpoweredsr20 · 01-13-2009, 08:17 PM

shifter shipped out today....TTT guys i still have alot of stuff!!!

nxpoweredsr20 · 01-17-2009, 08:50 AM

Updated!! shell and block sold...need this stuff gone make offers

nxpoweredsr20 · 01-21-2009, 05:47 PM

bump guys i still have some great prices: nismo motor mounts, sr trans, turbo set up, kouki tail lights, hids

ZipTied · 01-21-2009, 07:42 PM

Do you have a Zenki Ka24de ECU? PM me with the info thanks.

01-08-2009, 09:11 PM	#1
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	F/S:95 240sx shell and built sr20 partout Im parting out my 95 240sx and the fully built sr20. The shell is rust free and has a clear title. It will not come with the hood(sold), sterio system, speakers, or lights. It had some imperfections(included in pics) Will come with the wheels, tokico struts w/skunk 2 lowering springs and walbro fuel pump. Car has a new windshield and newly tinted windows. Shell sold zenki head lights w/hids 130 black rear seat 75 kouki tail lights 275 shift trim and boot 60 sparco steering wheel 150 The motor was fully built just under 5 thousand miles ago. It had timing problems so I disassembled it to change the timing chain and decided to try something new. The block is .020 overbored and has a comp. ratio of 9:1. It will come with je pistons, eagle rods, stock crank and acl race bearings. There is a small chip out of the block from the upper oil pan bolt cracking through due to silicone buildup. It is all external and there is no leaks. (in pics) sold Sr20det transmission great shifts new throwout bearing 300 I also have a fully built s14 head for 600 complete or I can part it out if there is enough intrest: Head250 Brian crower stage 2 cams250 Supertech valvesprings and retainers offer Rocker arms offer NEW oem lifters 275 valvesoffer Now for everything else: Oil pump sold Water pump30 Oil pickup25 ARP headstudssold Apexi head gasket 1k miles on it sold Greddy oil pan with recirculating catch can 400 Blitz dual sbc boost controller250 B&M short shifter sold HKS 740cc injectors430 Alternator 100 Nismo motor mounts100 S14 manual non abs drive shaft sold S14-S14 wiring harness(missing maf plug)100 Exhaust and intake manifold gaskets 15 each S14 zenki Power fc d getro w/all sensors and harnessessold Tomei spark plug cover sold Coil packs75 Garret t3 turbo (ar63 hot side, 70coldside 4 bolt flange)NO SHAFTPLAY 450 Treadstone performance top mount manifold and dump pipe(4 bolt flange) 250 I have all the receipts for the motor build and machine shop work if needed. All items are sold AS IS. All the prices are obo I need this stuff gone so pm me, txt me at 5136460999, or email me at [email protected] . TRADES: Rb25 motorset and mounting equipment for 240(driveshaft and motor mounts) Rb25det radiator Rb25det intercooler S13 shell ( no rust good body condition) S14 dd Here is a few pictures but more are located at: nxpoweredsr20/car for sale - Photobucket - Video and Image Hosting Last edited by nxpoweredsr20; 01-17-2009 at 08:50 AM..

01-08-2009, 10:37 PM	#7
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35) Feedback Score: 35 reviews	Pictures of the Greddy oil pan with recirc'd can catch please.. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

01-10-2009, 01:31 AM	#9
Xclusive_racer Zilvia FREAK! Join Date: Jul 2008 Location: Fort Worth, TX Age: 41 Posts: 1,245 Trader Rating: (21) Feedback Score: 21 reviews	Still have the motor? Is it a S14 motor or S13? __________________ You Build Cheap! Your Car Will Feel and Drive Cheap!

01-10-2009, 09:04 AM	#10
shoes59 Zilvia Junkie Join Date: Jun 2002 Location: New York Posts: 300 Trader Rating: (0) Feedback Score: 0 reviews	Interested in the Tomei Spark Plug Cover. $75 shipped to upstate NY 14450? Please reply with Paypal address. __________________ Jim Schumacher My 240

01-10-2009, 04:27 PM	#16
S14TEENZ Zilvia Addict Join Date: Oct 2008 Location: MD Posts: 880 Trader Rating: (8) Feedback Score: 8 reviews	front bumper shipped to 20781?? sellin skirts?? thanks __________________

01-08-2009, 09:16 PM	#2
TrIpLe "D" Leaky Injector Join Date: Jan 2009 Location: overland ,MO Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	will the s14 drive shaft work with vlsd and will u ship?

01-08-2009, 09:18 PM	#3
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	i can ship it might be a lil pricy but yes i used it with my j30 diff

01-08-2009, 09:46 PM	#4
TrIpLe "D" Leaky Injector Join Date: Jan 2009 Location: overland ,MO Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	how much shiped to 63114 send pm

01-08-2009, 09:51 PM	#5
silviakid2790 BANNED Join Date: May 2007 Location: wake forest, nc Age: 35 Posts: 329 Trader Rating: (1) Feedback Score: 1 reviews	that a gt35r?

01-08-2009, 09:56 PM	#6
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	the size is comparable but its only oil cooled not a dual bb....its good for 500 hp made 300whp on 13lbs of boost

01-09-2009, 08:00 PM	#8
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	pictures are located in photobucket but i will pm you some pictures

01-10-2009, 09:23 AM	#11
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	[email protected]

01-10-2009, 02:04 PM	#14
s14kozenki Zilvia Junkie Join Date: Sep 2008 Location: SOCAL Posts: 496 Trader Rating: (26) Feedback Score: 26 reviews	wondering if you're selling the rims? [email protected]

01-10-2009, 04:20 PM	#15
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	no sorry both the rims and interior door panels are going with the shell

01-10-2009, 05:24 PM	#17
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	body kit is also going with the shell its just off from towing it

01-12-2009, 12:36 PM	#18
Impact Black Zilvia Junkie Join Date: Apr 2008 Location: Los Angeles, CA Posts: 469 Trader Rating: (0) Feedback Score: 0 reviews	You should recieve the paypal for the shifter today.

01-13-2009, 08:17 PM	#19
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	shifter shipped out today....TTT guys i still have alot of stuff!!!

01-17-2009, 08:50 AM	#20
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	Updated!! shell and block sold...need this stuff gone make offers

01-21-2009, 05:47 PM	#21
nxpoweredsr20 Zilvia Junkie Join Date: Feb 2008 Location: indianapolis, IN Age: 35 Posts: 352 Trader Rating: (10) Feedback Score: 10 reviews	bump guys i still have some great prices: nismo motor mounts, sr trans, turbo set up, kouki tail lights, hids

01-21-2009, 07:42 PM	#22
ZipTied Leaky Injector Join Date: Oct 2008 Location: Beavercreek Age: 36 Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	Do you have a Zenki Ka24de ECU? PM me with the info thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode