questions about SSR vienna Kreis - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kunihongo · 07-14-2009, 07:38 PM

deleted...

ILoveJDM · 07-14-2009, 09:03 PM

im 99% positive you can take the faces out of the barrel

they have nuts on the back of each bolt

blueshark123 · 07-14-2009, 09:08 PM

Quote:

Originally Posted by ILoveJDM

im 99% positive you can take the faces out of the barrel

they have nuts on the back of each bolt

hes not askin that. He wants to know if he can remove the face with the tires still on the barrel. i want to know aswell

Maiku240sxS14 · 07-14-2009, 09:16 PM

Quote:

Originally Posted by ILoveJDM

im 99% positive you can take the faces out of the barrel

they have nuts on the back of each bolt

reading owns you LoL

I would like to know too...I would think you would be able to.

kunihongo · 07-14-2009, 09:15 PM

i did a little more researching and found out that they are 2 piece, does that mean it requires no silicone seal when assembling it? can it be done with tires inflated? or should i just deflate them? also anyone know the torque spec of the bolts?

Taniguchi_Is_#1 · 07-14-2009, 09:17 PM

no, it means that the face is welded to the outer barrel, so it does not come off separately. no tires. silicone is a must for ANY multi piece wheel.

CrazyIvan · 07-14-2009, 10:52 PM

Quote:

Originally Posted by Taniguchi_Is_#1

no, it means that the face is welded to the outer barrel, so it does not come off separately. no tires. silicone is a must for ANY multi piece wheel.

not true either.

I had a set of advan sa3r 17x9+10ish that were 2 piece, but NOT welded.
The barrel was one whole piece and the face bolted to the barrel, and I actually removed the center to repaint w/ the tires fully inflated w/o a problem.

OP, IMO if I wasnt sure if the wheels were 2 or 3 piece I'd get them w/ the tires off, repaint/refinish them and than mount/balance tires.

ILoveJDM · 07-15-2009, 03:36 PM

Quote:

Originally Posted by CrazyIvan

not true either.

I had a set of advan sa3r 17x9+10ish that were 2 piece, but NOT welded.
The barrel was one whole piece and the face bolted to the barrel, and I actually removed the center to repaint w/ the tires fully inflated w/o a problem.

OP, IMO if I wasnt sure if the wheels were 2 or 3 piece I'd get them w/ the tires off, repaint/refinish them and than mount/balance tires.

^^ this man knows.

'cuz people dont know.

[img]http://illgarage.com/images/build/310.jpg[/img]

***FaLKoN240*** · 07-14-2009, 09:44 PM

It's only $20 or so to remove tires, just find a good shop.

SoCal-s130 · 07-14-2009, 09:45 PM

Let me buy those.

slideways2004 · 07-14-2009, 09:50 PM

that's a negative. don't do that. don't waste $1500 and cause a safety hazard just to save $20

kunihongo · 07-14-2009, 09:49 PM

"Taniguchi is #1" thanks for the info.

additional info. http://www.ssr-wheels.com/technology/

kunihongo · 07-14-2009, 09:56 PM

I was wondering because the owner of the wheels asked if i would like the tires on or off.

yeah i changed my mind on taking them apart. i think i'll just leave them alone but is $1400 a good deal for them? tires are 80% front 60% rear. thanks again guys

07-14-2009, 09:44 PM	#9
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,893 Trader Rating: (73) Feedback Score: 73 reviews	It's only $20 or so to remove tires, just find a good shop. __________________ Best way to do business with me? Make your best offer FIRST.

07-14-2009, 09:45 PM	#10
SoCal-s130 Nissanaholic! Join Date: Mar 2007 Location: Chino Posts: 1,743 Trader Rating: (4) Feedback Score: 4 reviews	Let me buy those. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-14-2009, 07:38 PM	#1
kunihongo Leaky Injector Join Date: Mar 2006 Location: WA Posts: 72 Trader Rating: (1) Feedback Score: 1 reviews	questions about SSR vienna Kreis deleted... Last edited by kunihongo; 07-12-2016 at 03:43 PM..

07-14-2009, 09:03 PM	#2
ILoveJDM Nissanaholic! Join Date: Jul 2006 Location: SK Canada! Posts: 1,947 Trader Rating: (27) Feedback Score: 27 reviews	im 99% positive you can take the faces out of the barrel they have nuts on the back of each bolt

07-14-2009, 09:15 PM	#5
kunihongo Leaky Injector Join Date: Mar 2006 Location: WA Posts: 72 Trader Rating: (1) Feedback Score: 1 reviews	i did a little more researching and found out that they are 2 piece, does that mean it requires no silicone seal when assembling it? can it be done with tires inflated? or should i just deflate them? also anyone know the torque spec of the bolts?

07-14-2009, 09:17 PM	#6
Taniguchi_Is_#1 Post Whore! Join Date: Jun 2004 Location: West Arkansas Prefecture Posts: 3,141 Trader Rating: (3) Feedback Score: 3 reviews	no, it means that the face is welded to the outer barrel, so it does not come off separately. no tires. silicone is a must for ANY multi piece wheel.

07-14-2009, 09:50 PM	#11
slideways2004 Nissanaholic! Join Date: Apr 2005 Location: Houston Age: 38 Posts: 1,706 Trader Rating: (6) Feedback Score: 6 reviews	that's a negative. don't do that. don't waste $1500 and cause a safety hazard just to save $20

07-14-2009, 09:49 PM	#12
kunihongo Leaky Injector Join Date: Mar 2006 Location: WA Posts: 72 Trader Rating: (1) Feedback Score: 1 reviews	"Taniguchi is #1" thanks for the info. additional info. http://www.ssr-wheels.com/technology/

07-14-2009, 09:56 PM	#13
kunihongo Leaky Injector Join Date: Mar 2006 Location: WA Posts: 72 Trader Rating: (1) Feedback Score: 1 reviews	I was wondering because the owner of the wheels asked if i would like the tires on or off. yeah i changed my mind on taking them apart. i think i'll just leave them alone but is $1400 a good deal for them? tires are 80% front 60% rear. thanks again guys