washer nozzle removal? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ISTOTOSAO · 04-17-2003, 05:12 PM

this sounds a little odd but I can't get my nozzles off is there some trick or am I not pulling hard enough. thanks

**mrmephistopheles** · 04-17-2003, 05:18 PM

have you only tried from underneath the hood or what? tell us what you've been doing. Also, please tell us you're NOT installing 'Cobra Eyes' or whatever the **** they're being called. Tell us you're just transferring your stock washer nozzles to your new carbon hood!

ISTOTOSAO · 04-17-2003, 05:22 PM

no I am tring to sand and primer my car. I pulled of the little hoses and pushed up on the nozzle. I can get the front to come off a little but the whole thing won't come out. BTW it is an s13 coup if that makes any difference.

adey · 04-17-2003, 07:30 PM

there're (If I remember correctly) two little "buttons", one on each side of each nozzle, that you have to squeeze together and push up on at the same time, the nozzle should then pop off pretty easily.

ISTOTOSAO · 04-17-2003, 08:13 PM

thanks adey seems like it will be easy when I have a flash light and some long needle nose to get up in there. thanks alot.

04-17-2003, 05:12 PM	#1
ISTOTOSAO Zilvia Junkie Join Date: Jan 2003 Location: SB Mts, CA Age: 43 Posts: 546 Trader Rating: (6) Feedback Score: 6 reviews	washer nozzle removal? this sounds a little odd but I can't get my nozzles off is there some trick or am I not pulling hard enough. thanks

04-17-2003, 07:30 PM	#4
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	there're (If I remember correctly) two little "buttons", one on each side of each nozzle, that you have to squeeze together and push up on at the same time, the nozzle should then pop off pretty easily. __________________ Instagram: @SX180HKG

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-17-2003, 05:18 PM	#2
mrmephistopheles Magnanimous Justice Distribution Service Join Date: Mar 2002 Location: BFE Age: 23 Posts: 14,372 Trader Rating: (9) Rides Gallery: mrmephistopheles Feedback Score: 9 reviews	have you only tried from underneath the hood or what? tell us what you've been doing. Also, please tell us you're NOT installing 'Cobra Eyes' or whatever the **** they're being called. Tell us you're just transferring your stock washer nozzles to your new carbon hood!

04-17-2003, 05:22 PM	#3
ISTOTOSAO Zilvia Junkie Join Date: Jan 2003 Location: SB Mts, CA Age: 43 Posts: 546 Trader Rating: (6) Feedback Score: 6 reviews	no I am tring to sand and primer my car. I pulled of the little hoses and pushed up on the nozzle. I can get the front to come off a little but the whole thing won't come out. BTW it is an s13 coup if that makes any difference.

04-17-2003, 08:13 PM	#5
ISTOTOSAO Zilvia Junkie Join Date: Jan 2003 Location: SB Mts, CA Age: 43 Posts: 546 Trader Rating: (6) Feedback Score: 6 reviews	thanks adey seems like it will be easy when I have a flash light and some long needle nose to get up in there. thanks alot.