Tiny Question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

renegade8999 · 07-21-2009, 01:03 PM

So i feel dumb for this even being a question but thats okay...
My exhaust gas sensor kept ejecting itself from my engine i put it back in twice but kept happening so i went in and pulled the manifold cover off and really got that sucker tightened down haven't had the problem since but some how my manifold cover screw jiggled out and i don't know what size screw to go buy now to replace it and the cover rattles like no other (which is how i knew the screw was gone)
Its on a 89 240sx btw lol

Marc240 · 07-21-2009, 01:06 PM

If you have a second screw to the manifold cover, take it to a hardware store and they will have a tool to measure the thread and pitch. Match up another screw from the the store and if its too long, cut it down to size if nesessary to the length that you need it.

renegade8999 · 07-21-2009, 01:10 PM

Nope there isn't a second screw
bought the car some odd weeks ago so its still a new vehicle to me
it only had that 1 screw holding cover on

Marc240 · 07-21-2009, 01:12 PM

I dont have the tool handy at the moment or else i would go and check mine. Hope you get it figured out. Someone will be able to chime in, or anyone local you can get one from. Good luck

renegade8999 · 07-21-2009, 01:13 PM

I used a 10mm socket to get the bolt off
Have almost considered the old tried and true guess and check method at the hardware store by buying a dozen or so screws lol

renegade8999 · 07-21-2009, 01:14 PM

Thank you though

holemilk00 · 07-21-2009, 04:33 PM

My guess would be a 6mm x 1.25mm pitch. Its the most common shaft and pitch for the 10mm bolts on nissans.

renegade8999 · 07-22-2009, 11:38 AM

Thank you now i can head to hardware store with a general size idea in mind
will update afterwards

renegade8999 · 07-22-2009, 01:35 PM

I got a screw that fits well its was 6mm x 1mm
hardware store didn't carry 6mm x 1.25mm

bwoods · 09-08-2009, 08:57 AM

Time serta

*DALAZ_68* · 09-08-2009, 09:18 AM

or just take the cover...off...its crazy enough to work...

projectRDM · 09-08-2009, 11:00 AM

Don't know why this was dredged back up, but Nissan bolts are M6x1.0. We all know this.

And, you can remove and eliminate the heat shield anyway. We all know this too.

07-21-2009, 01:03 PM	#1
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Tiny Question So i feel dumb for this even being a question but thats okay... My exhaust gas sensor kept ejecting itself from my engine i put it back in twice but kept happening so i went in and pulled the manifold cover off and really got that sucker tightened down haven't had the problem since but some how my manifold cover screw jiggled out and i don't know what size screw to go buy now to replace it and the cover rattles like no other (which is how i knew the screw was gone) Its on a 89 240sx btw lol

07-21-2009, 04:33 PM	#7
holemilk00 Nissanaholic! Join Date: Oct 2006 Location: Cape Coral, FL Posts: 2,486 Trader Rating: (33) Feedback Score: 33 reviews	My guess would be a 6mm x 1.25mm pitch. Its the most common shaft and pitch for the 10mm bolts on nissans. __________________ I had a cool signature

09-08-2009, 09:18 AM	#11
DALAZ_68 not giving a fuck Join Date: Apr 2007 Location: Los angeles Age: 38 Posts: 15,077 Trader Rating: (104) Feedback Score: 104 reviews	or just take the cover...off...its crazy enough to work... __________________ LOL 240... whats better than 1? 5 1's ...lol PSN & XBL GT : Wh0pp3r68 CLUB LEXUS : Wh0pp3r

09-08-2009, 11:00 AM	#12
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Don't know why this was dredged back up, but Nissan bolts are M6x1.0. We all know this. And, you can remove and eliminate the heat shield anyway. We all know this too. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-21-2009, 01:06 PM	#2
Marc240 Zilvia Member Join Date: Feb 2008 Location: Washington Posts: 284 Trader Rating: (1) Feedback Score: 1 reviews	If you have a second screw to the manifold cover, take it to a hardware store and they will have a tool to measure the thread and pitch. Match up another screw from the the store and if its too long, cut it down to size if nesessary to the length that you need it.

07-21-2009, 01:10 PM	#3
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Nope there isn't a second screw bought the car some odd weeks ago so its still a new vehicle to me it only had that 1 screw holding cover on

07-21-2009, 01:12 PM	#4
Marc240 Zilvia Member Join Date: Feb 2008 Location: Washington Posts: 284 Trader Rating: (1) Feedback Score: 1 reviews	I dont have the tool handy at the moment or else i would go and check mine. Hope you get it figured out. Someone will be able to chime in, or anyone local you can get one from. Good luck

07-21-2009, 01:13 PM	#5
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	I used a 10mm socket to get the bolt off Have almost considered the old tried and true guess and check method at the hardware store by buying a dozen or so screws lol

07-21-2009, 01:14 PM	#6
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Thank you though

07-22-2009, 11:38 AM	#8
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Thank you now i can head to hardware store with a general size idea in mind will update afterwards

07-22-2009, 01:35 PM	#9
renegade8999 Join Date: Jul 2009 Location: Glendale Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	I got a screw that fits well its was 6mm x 1mm hardware store didn't carry 6mm x 1.25mm

09-08-2009, 08:57 AM	#10
bwoods Join Date: Mar 2009 Location: Central Florida Age: 36 Posts: 44 Trader Rating: (5) Feedback Score: 5 reviews	Time serta