Driveshaft bolts will not break loose - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Debo · 03-30-2010, 12:19 PM

Attempting to drop my subframe on the S14, and the 4 14mm bolts/nuts closest to the diff will not break loose? Sprayed some liquid wrench.

Any suggestions??

gsxr141 · 03-30-2010, 12:30 PM

cut them off and get new ones. it should be a nut and bolt setup.

murda-c · 03-30-2010, 12:31 PM

Couldn't get mine off either; they just rounded off.

I cut them off and got new hardware.

Wabash9000 · 03-30-2010, 12:40 PM

cut them and then support a forum sponsor
240SX Drive Shaft Bolt Kit S13 / S14

Debo · 03-30-2010, 12:48 PM

pls delete

Debo · 03-30-2010, 12:58 PM

I ended up grinding the ends of the bolts off with a grinder. was able to get a box end up in there... and loosen.

thanks guys

03-30-2010, 12:19 PM	#1
Debo Leaky Injector Join Date: Feb 2009 Location: The Bay Age: 43 Posts: 113 Trader Rating: (0) Feedback Score: 0 reviews	Driveshaft bolts will not break loose Attempting to drop my subframe on the S14, and the 4 14mm bolts/nuts closest to the diff will not break loose? Sprayed some liquid wrench. Any suggestions?? __________________

03-30-2010, 12:31 PM	#3
murda-c Post Whore! Join Date: Jan 2007 Location: Montgomery County, MD Age: 36 Posts: 3,198 Trader Rating: (1) Feedback Score: 1 reviews	Couldn't get mine off either; they just rounded off. I cut them off and got new hardware. __________________

03-30-2010, 12:48 PM	#5
Debo Leaky Injector Join Date: Feb 2009 Location: The Bay Age: 43 Posts: 113 Trader Rating: (0) Feedback Score: 0 reviews	pls delete __________________ Last edited by Debo; 03-30-2010 at 01:11 PM..

03-30-2010, 12:58 PM	#6
Debo Leaky Injector Join Date: Feb 2009 Location: The Bay Age: 43 Posts: 113 Trader Rating: (0) Feedback Score: 0 reviews	I ended up grinding the ends of the bolts off with a grinder. was able to get a box end up in there... and loosen. thanks guys __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2010, 12:30 PM	#2
gsxr141 Zilvia Junkie Join Date: May 2008 Location: rochester Posts: 327 Trader Rating: (3) Feedback Score: 3 reviews	cut them off and get new ones. it should be a nut and bolt setup.

03-30-2010, 12:40 PM	#4
Wabash9000 Zilvia Member Join Date: Oct 2006 Location: Kansas Age: 37 Posts: 217 Trader Rating: (0) Feedback Score: 0 reviews	cut them and then support a forum sponsor 240SX Drive Shaft Bolt Kit S13 / S14