|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
08-07-2003, 09:18 PM
|
#1 |
|
Zilvia Member
 
Join Date: May 2002
Location: Portland, Oregon
Age: 39
Posts: 260
Trader Rating: (0)
 Feedback Score: 0 reviews
|
Bought SR clip, Wiring harness cut + taped a lot!
Hey, I just removed my wiring harness so i could lengthen all the wires I need to, and install some electronics before I swap out my KA. I found a **** load of electrical tape where some moron hacked it all up. Take a look and tell me what you think.
Joey  
__________________
Exceed 400x200 size limit |
|
|
| Sponsored Links |
|
08-07-2003, 09:48 PM
|
#2 |
|
Zilvia Member
Join Date: May 2002
Location: Portland, Oregon
Age: 39
Posts: 260
Trader Rating: (0)
Feedback Score: 0 reviews
|
I looked into the wires that are modified. they are:
38/39/47/48 ECCS power + ground 19 oxygen sensor 22/30 CAS 180º 31/40 CAS 1º 27 knock sensor 14 clk (timing) 17 MAFS ground 36 IGN ignition 46 ECCS power backup 107/108/116 injector ground 3 tach signal This is seeming to me that the previous owner hardwired an aftermarket multichecker. What should I do with it? I have to wire 3 aftermarket gauges, a turbo timer, and an a'pexi rev/speed meter into that mess? Joey
__________________
Exceed 400x200 size limit |
|
|
|
|
08-07-2003, 10:27 PM
|
#3 |
|
Zilvia Member
Join Date: May 2003
Location: College Station, TX
Age: 44
Posts: 255
Trader Rating: (0)
Feedback Score: 0 reviews
   |
actually, they are supposed to be cut in the location shown in that picture. I just about pooped myself when I got the harness pulled from my clip and it looks exactly like yours, but I called Wayne at Phase 2 and he said it was supposed to be like that. I hooked everything up and it has worked flawlessly ever since. DOn't worry man, it is cool
__________________
There *is* a spoon... |
|
|
|
|
08-08-2003, 12:19 AM
|
#4 |
|
Zilvia Member
Join Date: May 2002
Location: Portland, Oregon
Age: 39
Posts: 260
Trader Rating: (0)
Feedback Score: 0 reviews
|
So all that electrical tape is "JDM factory electrical tape"?
I love saying stuff is JDM when it doesn't matter.  Joey
__________________
Exceed 400x200 size limit |
|
|
|
|
08-08-2003, 12:55 AM
|
#6 |
|
Zilvia Member
Join Date: May 2002
Location: Portland, Oregon
Age: 39
Posts: 260
Trader Rating: (0)
Feedback Score: 0 reviews
|
I was just looking at what has to be changed to mate the sr harness to a ka gauge cluster, and It looks like that white clip may have gone to the gauge cluster. Is that possible? Either way this will work just fine.
Joey
__________________
Exceed 400x200 size limit |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
