S14 Clutch/ Tranny issue - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

70newport · 09-11-2010, 06:57 AM

So a while ago I parked my car for a week and when I went to drive it again I had no 5th or reverse. problem got worse loosing 1st and 4th as well. Took off the tranny made sure clutch was all good, replaced tranny, replaced clutch master and slave cylinders and still have the same issue..... where am I going wrong.

Thanks

az_240 · 09-11-2010, 04:09 PM

Possibly air in the system? Try replacing the stock clutch line/dampner with a SS one and bleed the clutch line. SPL sells them for like $20.

Also check to be sure the clutch fork didn't come loose or something.

70newport · 09-14-2010, 08:45 PM

So I made sure the fork was good. It is in place and everything. Deleted the damper box and still same issue... Please help!

09-11-2010, 06:57 AM	#1
70newport Join Date: Dec 2008 Location: edmonton Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	S14 Clutch/ Tranny issue So a while ago I parked my car for a week and when I went to drive it again I had no 5th or reverse. problem got worse loosing 1st and 4th as well. Took off the tranny made sure clutch was all good, replaced tranny, replaced clutch master and slave cylinders and still have the same issue..... where am I going wrong. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-11-2010, 04:09 PM	#2
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	Possibly air in the system? Try replacing the stock clutch line/dampner with a SS one and bleed the clutch line. SPL sells them for like $20. Also check to be sure the clutch fork didn't come loose or something.

09-14-2010, 08:45 PM	#3
70newport Join Date: Dec 2008 Location: edmonton Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	So I made sure the fork was good. It is in place and everything. Deleted the damper box and still same issue... Please help!