Clutch Fluid - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RedlineRacer · 08-27-2003, 10:30 AM

I've been going through clutch fluid pretty fast. Two weeks ago I changed my clutch and then I filled up my clutch cylinder to the top and I check it the other day and it was almost empty. This is not the first time its done this.

Also, I thought it might be a leak in my lines. But I looked at the concrete where I park my car at, and there aren't any spots of fluid.

Dousan_PG · 08-27-2003, 10:31 AM

check the lines (hard and soft). check your cylinders (master and slave)

RedlineRacer · 08-27-2003, 10:33 AM

Damn Dousan, quick response. Where is the slave located at? Should I be looking for cracks in the lines?

the head · 08-27-2003, 10:44 AM

look for cracks and wet areas around and on the lines slave cyl is bolted to the side of the trans just follow the line down from the master cyl

08-27-2003, 10:30 AM	#1
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	Clutch Fluid I've been going through clutch fluid pretty fast. Two weeks ago I changed my clutch and then I filled up my clutch cylinder to the top and I check it the other day and it was almost empty. This is not the first time its done this. Also, I thought it might be a leak in my lines. But I looked at the concrete where I park my car at, and there aren't any spots of fluid.

08-27-2003, 10:31 AM	#2
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	check the lines (hard and soft). check your cylinders (master and slave) __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

08-27-2003, 10:44 AM	#4
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 2,164 Trader Rating: (3) Feedback Score: 3 reviews	look for cracks and wet areas around and on the lines slave cyl is bolted to the side of the trans just follow the line down from the master cyl __________________ I never knew you could do that with an eggplant

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-27-2003, 10:33 AM	#3
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	Damn Dousan, quick response. Where is the slave located at? Should I be looking for cracks in the lines?