NY almost complete S14 sr20det partout - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

yoozef · 12-07-2010, 02:18 PM

Ok, so i went to buy a few parts and ended up picking up the entire thing, and i don't really need it, so i'm parting it out:
- S14 SR20DET short block, sleeved, stock 86mm, looks good and turns with no knock, the only thing i noticed were wrong with it is that the upgraded metal chain guide (the arched one) does not have the plastic piece of it and there are minimal scuffs on top of the pistons (the intake valves hit the pistons). Complete minus water pump pulley - $500 picked up

Please note i was trying to clean up the pistons to show the damage, but it's way too freaking cold and it turned to ice, but you get the idea, also note the missing plastic on the arched timing chain guide:

- s14 sr transmission, includes pivot fork, and tob $200
- transmission gasket $30, free with transmission

- head with BC springs/retainers, intake side valves are bent, exhaust side is good, missing some rocker arms, i'll update tomorrow with what exactly comes with it $250

- s14 valve cover $80, or 50 if purchased with the head
- Stage 3 S14 SR20 BC0206 cams 272/272 12.55 lift, exhaust side comes with he cam gear, $260
- Stage 2 S14 SR20 BC0205 cams 264/264 12.06 lift, no cam gears, some slight scuffs on them, but still very usable $150

- buy either set of cams and get the HKS springs (no markings on them, but i was told these are 100% HKS springs) for free or if you want just the springs $40
- VTC cam gear solenoid, good condition, gets rid of the noise if your NVCS is shot $80
- some random top mount exhaust manifold, looks like it's ceramaic coated $50

- S14 Alternator $50
If you need anything else, ask, i might part if there's interest in individual parts, pics will follow, i'm also willing to deliver bigger items for gas $$ within 50 mile radius from 10598, thanks

yoozef · 12-08-2010, 07:50 AM

i have sales lined up for the tranny and valve cover, bump for everything else

yoozef · 12-08-2010, 07:37 PM

bump for pics

yoozef · 12-09-2010, 02:40 PM

bump this bish up

Touge_drifter · 12-09-2010, 03:35 PM

You still got the tranny, I could always use another s14 trans!

yoozef · 12-09-2010, 07:31 PM

yes, i haver 2 potential buyers, but no one pulled the trigger yet

Touge_drifter · 12-09-2010, 07:39 PM

Head shipped to 48625

yoozef · 12-09-2010, 07:57 PM

i'm gonna go to the post office to get a quote tomorrow, i have someone who wants the valve cover and need a quote for that too

Touge_drifter · 12-09-2010, 08:02 PM

Ups would be cheaper. I shipped a bare s13 block was only$ 50. Would you go any lower on the head?

yoozef · 12-09-2010, 10:05 PM

depending on what time i get out of school tomorrow (exam week) i'll try to get a quote from ups... as to the price i think it's pretty fair considering just the springs/retainers combo would run you $200, and i'm gonna include whatever you see in the pics (lifters, vtc solenoid, bracket, water outlet, shims, valve cover bolts) and crap thats in the box (oil tubes, cam caps, a few rocker arms etc), but i will update with what exactly comes with it this sunday

Touge_drifter · 12-09-2010, 10:12 PM

I just want the head and cam collars with bolts. If it comes with everything for 250 fine. Shipping should be around 15-22bucks. Keep me updated.....i just want a second head to rebuild

K_style · 12-09-2010, 10:18 PM

Interested in VTC cam gear solenoid and 264 Cams..
give me shipped price to 97123 please...

K_style · 12-09-2010, 10:20 PM

also... do you have pic of VTC cam gear solenoid ?

yoozef · 12-09-2010, 10:35 PM

you can see the cam solenoid in one of the pics of the head, but i will take better pics of it tomorrow. I will take $150 for cams and $40 for the solenoid, so i can do $200 shipped, if that sounds good, pm me for my paypal info

crescendo · 12-13-2010, 02:25 AM

I need cams (264s + springs), shipped, if they're still available. My head's at the machine shop now. Could you send good pics of scuffing please? [email protected]

yoozef · 12-18-2010, 07:27 PM

bump this ish i should be up and running now, i will get back to ppl asap

*racerx2k1* · 12-19-2010, 09:55 AM

Quote:

Originally Posted by yoozef

i have sales lined up for the tranny and valve cover, bump for everything else

Quote:

Originally Posted by yoozef

bump for pics

Quote:

Originally Posted by yoozef

bump this bish up

Quote:

Originally Posted by yoozef

bump this ish i should be up and running now, i will get back to ppl asap

2 bump limit. You can start new thread in 3 days.

12-07-2010, 02:18 PM	#1
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	almost complete S14 sr20det partout Ok, so i went to buy a few parts and ended up picking up the entire thing, and i don't really need it, so i'm parting it out: - S14 SR20DET short block, sleeved, stock 86mm, looks good and turns with no knock, the only thing i noticed were wrong with it is that the upgraded metal chain guide (the arched one) does not have the plastic piece of it and there are minimal scuffs on top of the pistons (the intake valves hit the pistons). Complete minus water pump pulley - $500 picked up Please note i was trying to clean up the pistons to show the damage, but it's way too freaking cold and it turned to ice, but you get the idea, also note the missing plastic on the arched timing chain guide: - s14 sr transmission, includes pivot fork, and tob $200 - transmission gasket $30, free with transmission - head with BC springs/retainers, intake side valves are bent, exhaust side is good, missing some rocker arms, i'll update tomorrow with what exactly comes with it $250 - s14 valve cover $80, or 50 if purchased with the head - Stage 3 S14 SR20 BC0206 cams 272/272 12.55 lift, exhaust side comes with he cam gear, $260 - Stage 2 S14 SR20 BC0205 cams 264/264 12.06 lift, no cam gears, some slight scuffs on them, but still very usable $150 - buy either set of cams and get the HKS springs (no markings on them, but i was told these are 100% HKS springs) for free or if you want just the springs $40 - VTC cam gear solenoid, good condition, gets rid of the noise if your NVCS is shot $80 - some random top mount exhaust manifold, looks like it's ceramaic coated $50 - S14 Alternator $50 If you need anything else, ask, i might part if there's interest in individual parts, pics will follow, i'm also willing to deliver bigger items for gas $$ within 50 mile radius from 10598, thanks Last edited by yoozef; 12-08-2010 at 07:54 PM..

12-09-2010, 03:35 PM	#5
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 45 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	You still got the tranny, I could always use another s14 trans! __________________ No tune No life

12-09-2010, 07:39 PM	#7
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 45 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Head shipped to 48625 __________________ No tune No life

12-09-2010, 08:02 PM	#9
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 45 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	Ups would be cheaper. I shipped a bare s13 block was only$ 50. Would you go any lower on the head? __________________ No tune No life

12-09-2010, 10:12 PM	#11
Touge_drifter Zilvia Junkie Join Date: Nov 2010 Location: Down south Age: 45 Posts: 545 Trader Rating: (6) Feedback Score: 6 reviews	I just want the head and cam collars with bolts. If it comes with everything for 250 fine. Shipping should be around 15-22bucks. Keep me updated.....i just want a second head to rebuild __________________ No tune No life

12-08-2010, 07:50 AM	#2
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	i have sales lined up for the tranny and valve cover, bump for everything else

12-08-2010, 07:37 PM	#3
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	bump for pics

12-09-2010, 02:40 PM	#4
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	bump this bish up

12-09-2010, 07:31 PM	#6
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	yes, i haver 2 potential buyers, but no one pulled the trigger yet

12-09-2010, 07:57 PM	#8
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	i'm gonna go to the post office to get a quote tomorrow, i have someone who wants the valve cover and need a quote for that too

12-09-2010, 10:05 PM	#10
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	depending on what time i get out of school tomorrow (exam week) i'll try to get a quote from ups... as to the price i think it's pretty fair considering just the springs/retainers combo would run you $200, and i'm gonna include whatever you see in the pics (lifters, vtc solenoid, bracket, water outlet, shims, valve cover bolts) and crap thats in the box (oil tubes, cam caps, a few rocker arms etc), but i will update with what exactly comes with it this sunday

12-09-2010, 10:18 PM	#12
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	Interested in VTC cam gear solenoid and 264 Cams.. give me shipped price to 97123 please...

12-09-2010, 10:20 PM	#13
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	also... do you have pic of VTC cam gear solenoid ?

12-09-2010, 10:35 PM	#14
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	you can see the cam solenoid in one of the pics of the head, but i will take better pics of it tomorrow. I will take $150 for cams and $40 for the solenoid, so i can do $200 shipped, if that sounds good, pm me for my paypal info

12-13-2010, 02:25 AM	#15
crescendo Leaky Injector Join Date: Sep 2006 Location: S-A-C Posts: 142 Trader Rating: (0) Feedback Score: 0 reviews	I need cams (264s + springs), shipped, if they're still available. My head's at the machine shop now. Could you send good pics of scuffing please? [email protected]

12-18-2010, 07:27 PM	#16
yoozef Zilvia Addict Join Date: Sep 2007 Location: NY Posts: 684 Trader Rating: (8) Feedback Score: 8 reviews	bump this ish i should be up and running now, i will get back to ppl asap

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode