KY kouki tails, RUCA, caged shell, carbon fiber seat,etc... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hear_no_evo · 05-01-2011, 12:28 PM

this is my getting out of the game for a while sale, so as the saying goes my loss is your gain.

all of the following prices do not include shipping or paypal fees (unless noted)

I am also willing to make package deals for better discounts so please feel free to send me a pm

txt anytime 502-548-6246 Joe

kouki hatch tail lights
425 shipped in 48 states and pp included
does not include lower metal garnish
no cracks or leaks and comes with bulbs
retail is $600 for used with garnish and garnish is $100 shipped

pair of 4pt cam lock Sparco harness
200firm or 100 a piece (shipping would be 10 per or 10 for both plus 3 for pp)
still in spec, no stains or tears
purchased early 2010
retail $200 a piece

18x9.5 +12 FN01 wheels and tires 95% tread left
900obo
gunmetal gray
not forged

50mm hub centric 5 lug spacers unknown mileage
60 shipped for the pair
all the studs will need to be replaced because some idiot impacted the wrong lug nuts on
studs range from $2-$9 a stud depending on length
retail $120 for pair

Stich welded, gutted, and caged shell; chassis harness has already been tucked along with brake lines
600obo
clean and clear ky title in hand
also includes rear Bmagic 50mm widebody installed (will need to be redone bc bondo is cracking)
as well as Bmagic rear bumper and side skirts
no body or chassis rust
spl aluminum subframe bushings
spl aluminum steering colum insert
all bushings replaced with energy suspension poly bushings
most of the sound deadening has been removed (only bit left is on transmission tunnel)
battery box relocated to center rear where rear seats used to be
fuse panel is center mounted for easy access
windshield has huge crack in it
dash panel has been clean and stripped to bare plastic so no more dash cracking to worry about
will not be a rolling chassis unless i can find some stock suspension parts to put back on
i can borrow a buddies suspension and spare to load it on the trailer and unload it but will need
to remove it once its on the ground

if car does not sell in a few months then i may cut the cage out and scrap the car is anyone wants to purchase
the roll cage for 300
it was a custom welded cage not store baught bolt in

badging has been stripped and repainted so i will have to sell as unknown brand RUCA's
85 shipped in 48 states and pp included

badging has been stripped and repainted so i will have to sell as unknown brand traction arms
55 shipped in 48 states and pp included

ebay front and rear strut bars
20firm
never used bronze color
retail $50

tail light

bkuhl · 05-02-2011, 02:23 AM

can you post up pics of the shell itself?

hear_no_evo · 05-02-2011, 02:04 PM

where are those pricing? cheapest i have found was 520 not including shipping so with that being said cheapest i have seen is 600 shipped and pm sent about shell(dont want to reach my bump limit responding to these post like last time)

onevia drift · 05-02-2011, 11:19 PM

Bump for shell pics!!!!!!

hear_no_evo · 05-03-2011, 11:17 AM

lolz butt hurt...
on a different note would it sound better if i put it this way 375 plus paypal/shipping?.... (35 shipping and bubble wrap/box and ins [make sure nothing happens in transit],then another 18 or so for PP)

or 370 picked up

(i am not a company so i cant come close to free shipping)

thank for the links
450 is a great price didnt know they drop so much in the past year.

these lights were only mounted for about 3 months and saw rain once.... so i consider them fairly new but not fresh out of box.

if they dont sell in 4 months then i may drop price but not hurting so much for cash and feel the price is legit for pick up but by all means choose the 450 shipped ones becuase that is a great priced shipped

waxball88 · 05-03-2011, 02:07 PM

can you measure the waist on that nrg seat for me?

bkuhl · 05-10-2011, 11:49 PM

still waiting for pics of the shell

hear_no_evo · 05-12-2011, 02:29 PM

what is your cell and i will send you pics... my phone is being a dbag and not uploading to comp...

maybe later i will go down on price but the reason i cant go that low is becuase i am not a big supplier so my shipping/packaging it more then they are charging (free) but the price i am selling the lights for is cheaper (375) so to me the price i have listed is only pratical for a local/pickup individual.

partyboy25 · 05-12-2011, 08:25 PM

Friendly heads up, text pictures to email address instead of a phone number and you will receive them in your email...may save you some time from texting everyone interested.

hear_no_evo · 05-13-2011, 06:22 AM

ya that is how my phone is being a dbag.... it wont send pics to an email... it will to other phones but not to any emails... not sure why either.

*racerx2k1* · 05-13-2011, 08:40 AM

http://zilvia.net/f/wheels-tires/109...-ask-pics.html

05-01-2011, 12:28 PM	#1
hear_no_evo Join Date: Mar 2009 Location: ky Age: 38 Posts: 44 Trader Rating: (1) Feedback Score: 1 reviews	kouki tails, RUCA, caged shell, carbon fiber seat,etc... this is my getting out of the game for a while sale, so as the saying goes my loss is your gain. all of the following prices do not include shipping or paypal fees (unless noted) I am also willing to make package deals for better discounts so please feel free to send me a pm txt anytime 502-548-6246 Joe kouki hatch tail lights 425 shipped in 48 states and pp included does not include lower metal garnish no cracks or leaks and comes with bulbs retail is $600 for used with garnish and garnish is $100 shipped pair of 4pt cam lock Sparco harness 200firm or 100 a piece (shipping would be 10 per or 10 for both plus 3 for pp) still in spec, no stains or tears purchased early 2010 retail $200 a piece 18x9.5 +12 FN01 wheels and tires 95% tread left 900obo gunmetal gray not forged 50mm hub centric 5 lug spacers unknown mileage 60 shipped for the pair all the studs will need to be replaced because some idiot impacted the wrong lug nuts on studs range from $2-$9 a stud depending on length retail $120 for pair Stich welded, gutted, and caged shell; chassis harness has already been tucked along with brake lines 600obo clean and clear ky title in hand also includes rear Bmagic 50mm widebody installed (will need to be redone bc bondo is cracking) as well as Bmagic rear bumper and side skirts no body or chassis rust spl aluminum subframe bushings spl aluminum steering colum insert all bushings replaced with energy suspension poly bushings most of the sound deadening has been removed (only bit left is on transmission tunnel) battery box relocated to center rear where rear seats used to be fuse panel is center mounted for easy access windshield has huge crack in it dash panel has been clean and stripped to bare plastic so no more dash cracking to worry about will not be a rolling chassis unless i can find some stock suspension parts to put back on i can borrow a buddies suspension and spare to load it on the trailer and unload it but will need to remove it once its on the ground if car does not sell in a few months then i may cut the cage out and scrap the car is anyone wants to purchase the roll cage for 300 it was a custom welded cage not store baught bolt in badging has been stripped and repainted so i will have to sell as unknown brand RUCA's 85 shipped in 48 states and pp included badging has been stripped and repainted so i will have to sell as unknown brand traction arms 55 shipped in 48 states and pp included ebay front and rear strut bars 20firm never used bronze color retail $50 tail light Last edited by hear_no_evo; 05-09-2011 at 07:36 AM.. Reason: sold items

05-02-2011, 02:23 AM	#2
bkuhl Leaky Injector Join Date: Apr 2010 Location: Clovis, NM Age: 44 Posts: 149 Trader Rating: (4) Feedback Score: 4 reviews	can you post up pics of the shell itself? __________________ 95 Nissan 240SX S14.5 RHD TOMEI Powered Redtop SR20DET@17psi(322whp/319tq)

05-10-2011, 11:49 PM	#7
bkuhl Leaky Injector Join Date: Apr 2010 Location: Clovis, NM Age: 44 Posts: 149 Trader Rating: (4) Feedback Score: 4 reviews	still waiting for pics of the shell __________________ 95 Nissan 240SX S14.5 RHD TOMEI Powered Redtop SR20DET@17psi(322whp/319tq)

05-13-2011, 08:40 AM	#11
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	http://zilvia.net/f/wheels-tires/109...-ask-pics.html __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-02-2011, 02:04 PM	#3
hear_no_evo Join Date: Mar 2009 Location: ky Age: 38 Posts: 44 Trader Rating: (1) Feedback Score: 1 reviews	where are those pricing? cheapest i have found was 520 not including shipping so with that being said cheapest i have seen is 600 shipped and pm sent about shell(dont want to reach my bump limit responding to these post like last time)

05-02-2011, 11:19 PM	#4
onevia drift Zilvia Addict Join Date: Sep 2008 Location: Frisco/Dallas, TX Posts: 795 Trader Rating: (18) Feedback Score: 18 reviews	Bump for shell pics!!!!!!

05-03-2011, 11:17 AM	#5
hear_no_evo Join Date: Mar 2009 Location: ky Age: 38 Posts: 44 Trader Rating: (1) Feedback Score: 1 reviews	lolz butt hurt... on a different note would it sound better if i put it this way 375 plus paypal/shipping?.... (35 shipping and bubble wrap/box and ins [make sure nothing happens in transit],then another 18 or so for PP) or 370 picked up (i am not a company so i cant come close to free shipping) thank for the links 450 is a great price didnt know they drop so much in the past year. these lights were only mounted for about 3 months and saw rain once.... so i consider them fairly new but not fresh out of box. if they dont sell in 4 months then i may drop price but not hurting so much for cash and feel the price is legit for pick up but by all means choose the 450 shipped ones becuase that is a great priced shipped

05-03-2011, 02:07 PM	#6
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	can you measure the waist on that nrg seat for me?

05-12-2011, 02:29 PM	#8
hear_no_evo Join Date: Mar 2009 Location: ky Age: 38 Posts: 44 Trader Rating: (1) Feedback Score: 1 reviews	what is your cell and i will send you pics... my phone is being a dbag and not uploading to comp... maybe later i will go down on price but the reason i cant go that low is becuase i am not a big supplier so my shipping/packaging it more then they are charging (free) but the price i am selling the lights for is cheaper (375) so to me the price i have listed is only pratical for a local/pickup individual.

05-12-2011, 08:25 PM	#9
partyboy25 Join Date: May 2008 Location: Jacksonville,NC Age: 37 Posts: 40 Trader Rating: (2) Feedback Score: 2 reviews	Friendly heads up, text pictures to email address instead of a phone number and you will receive them in your email...may save you some time from texting everyone interested.

05-13-2011, 06:22 AM	#10
hear_no_evo Join Date: Mar 2009 Location: ky Age: 38 Posts: 44 Trader Rating: (1) Feedback Score: 1 reviews	ya that is how my phone is being a dbag.... it wont send pics to an email... it will to other phones but not to any emails... not sure why either.