Snapped (Earl's) oil fitting on the block. What's the size/pitch? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

***FaLKoN240*** · 05-02-2011, 10:48 PM

S13 SR20DET black top with stainless oil and water lines to a non bb t28.

1. I recently changed out the gaskets on my T28 set up and accidentally snapped the oil feed fitting from my block to the turbo.

2. The line is okay, and I got both broken ends out of the motor and turbo feed line.

3. I bought 3 different metric ones, and none of them fit, so I'm thinking it's standard.

4. It's not stripped because it still threads in fine.

5. What is the fitting to the motor size/pitch thread?

05-02-2011, 10:48 PM	#1
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,893 Trader Rating: (73) Feedback Score: 73 reviews	Snapped (Earl's) oil fitting on the block. What's the size/pitch? S13 SR20DET black top with stainless oil and water lines to a non bb t28. 1. I recently changed out the gaskets on my T28 set up and accidentally snapped the oil feed fitting from my block to the turbo. 2. The line is okay, and I got both broken ends out of the motor and turbo feed line. 3. I bought 3 different metric ones, and none of them fit, so I'm thinking it's standard. 4. It's not stripped because it still threads in fine. *5. What is the fitting to the motor size/pitch thread?* __________________ Best way to do business with me? Make your best offer FIRST. Last edited by FaLKoN240; 05-02-2011 at 11:23 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode