WTB Tall Z32 ebrake Kind pin and 2+2 Cables

[ebayDM]

Hey guys I am looking for a pair of the taller z32 Ebrake King pins.

and 300zx 2+2 e brake Cables

Thanks

[Evan(CA)]

Originally Posted by ebayDM

Hey guys I am looking for a pair of the taller z32 Ebrake King pins.

and 300zx 2+2 e brake Cables

Thanks

I have both of what you are looking for but you need need to explain in detail but the ebrake king pin is.

[blueshark123]

i got the king pin i assume its the really big bolt i can do 30 shipped they sell for alot more new

[blktopsr20]

there's 2 kinds of main bolts, 1 for tabbed(flange) hubs or 1 for non-tabbed(no flange) hubs. Question is what hubs do you have?

[yodc]

Originally Posted by blktopsr20

there's 2 kinds of main bolts, 1 for tabbed(flange) hubs or 1 for non-tabbed(no flange) hubs. Question is what hubs do you have?

Quoted for the truth...

If you're tying to run the tabed hubs you're stock 13/14 axle is too small btw....

Its like throwing a hotdog down a hallway.

[rancid240]

Originally Posted by yodc

If you're tying to run the tabed hubs you're stock 13/14 axle is too small btw....

Its like throwing a hotdog down a hallway.

This is not true. I have pulled a few tabbed hubs off non turbo z32's which worked fine with stock s13/14 axles.

[richie_z40sx]

Its the z32 turbo rear hubs that uses a bigger axle for the hubs...I ran into that mistake three years ago being a noob...

[yodc]

From what I've encountered in my garage the tt hubs are tabbed and too big for stock axles. Perhaps there is a specific year range this is not the case?