ND SR20 supertech pistons and apex'i HG FS - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

revolutionz_s13 · 02-29-2012, 10:36 AM

Going to end up sleeving my SR20 block, so going to go to a 90mm piston instead of these 87mm. Just looking to recoup some of my money on these, both are BNIB. Will ship at buyers expense. PM me if interested.

Supertech 87.0mm pistons WITH rings - $380

Apex'i 87.0mm HG, 1.5mm thick - $150

revolutionz_s13 · 03-01-2012, 10:33 PM

Drunk bump!

revolutionz_s13 · 03-04-2012, 02:59 PM

bump
msglength

revolutionz_s13 · 03-05-2012, 08:44 AM

final bump

Team SIKNISS · 03-05-2012, 09:35 AM

How much for the pistons shipped to 89081

revolutionz_s13 · 03-06-2012, 09:47 AM

$390. pm sent.

firebrick240 · 03-06-2012, 03:44 PM

what is the compression ratio on these bad boyz?

revolutionz_s13 · 03-06-2012, 11:22 PM

9:1
length

revolutionz_s13 · 03-07-2012, 11:31 PM

someone buy these so i can get to 2.2l!

240agsx · 03-08-2012, 12:08 AM

Would this hg work for 86.5 bore

Sent from my DROIDX using Tapatalk

revolutionz_s13 · 03-08-2012, 09:11 AM

yeah it would

revolutionz_s13 · 03-11-2012, 11:16 PM

still available!!

crayzwhiteboy · 03-12-2012, 01:10 AM

ok noob here.

correct me if im wrong please
the stock bore of an sr is 86.5
if i buy these pistons i will have to go .5mm over each cylinder turning my sr20 into an sr22

and the headgasket
it is made for sr20 or sr22?

and which sr motor is it for s13 or s14? i thought they were different

revolutionz_s13 · 03-12-2012, 08:18 AM

they are the same parts for s13, s14, and s15. the headgasket is for 87mm pistons. which means the gasket bore is 88mm. the stock bore of an sr20 is 86mm, which means youre 1mm oversize. to make it an sr22, you have to sleeve the block and use a 90mm bore.

revolutionz_s13 · 03-13-2012, 08:56 AM

Lets go guys, make a reasonable offer

revolutionz_s13 · 03-18-2012, 11:59 PM

back up, still available

revolutionz_s13 · 03-22-2012, 10:16 AM

up up up lets get these sold

h23 · 03-22-2012, 10:33 AM

Quote:

Originally Posted by revolutionz_s13

they are the same parts for s13, s14, and s15. the headgasket is for 87mm pistons. which means the gasket bore is 88mm. the stock bore of an sr20 is 86mm, which means youre 1mm oversize. to make it an sr22, you have to sleeve the block and use a 90mm bore.

The headgaskets are not the same between s13 and s14/15 SR's.

revolutionz_s13 · 03-22-2012, 11:54 AM

Quote:

Originally Posted by h23

The headgaskets are not the same between s13 and s14/15 SR's.

According to Apexi they are. Maybe Apexi doesnt know what they are doing tho....

Metal Head Gasket Nissan SR20DET Engine, Bore: 87mm, t= 1.5mm (S13, S14, S15) APEX Integration

revolutionz_s13 · 03-27-2012, 05:07 PM

bring it back up

patsS14 · 03-27-2012, 05:34 PM

can you bore out your block with a stock head or should it be built?

revolutionz_s13 · 03-27-2012, 08:40 PM

the bore wont affect the head. stock head will work fine.

Po_31 · 03-31-2012, 02:03 PM

still have the gaskets

revolutionz_s13 · 04-12-2012, 09:22 AM

Lets bring these back up, hopefully we can get these sold...make a reasonable offer, these are already cheaper than you will find anywhere online!

02-29-2012, 10:36 AM	#1
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	SR20 supertech pistons and apex'i HG FS Going to end up sleeving my SR20 block, so going to go to a 90mm piston instead of these 87mm. Just looking to recoup some of my money on these, both are BNIB. Will ship at buyers expense. PM me if interested. Supertech 87.0mm pistons WITH rings - $380 Apex'i 87.0mm HG, 1.5mm thick - $150

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2012, 10:33 PM	#2
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Drunk bump!

03-04-2012, 02:59 PM	#3
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	bump msglength

03-05-2012, 08:44 AM	#4
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	final bump

03-05-2012, 09:35 AM	#5
Team SIKNISS Join Date: Oct 2011 Location: Sin city Posts: 24 Trader Rating: (1) Feedback Score: 1 reviews	How much for the pistons shipped to 89081

03-06-2012, 09:47 AM	#6
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	$390. pm sent.

03-06-2012, 03:44 PM	#7
firebrick240 Leaky Injector Join Date: Sep 2011 Location: Des Moines Age: 44 Posts: 59 Trader Rating: (1) Feedback Score: 1 reviews	what is the compression ratio on these bad boyz?

03-06-2012, 11:22 PM	#8
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	9:1 length

03-07-2012, 11:31 PM	#9
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	someone buy these so i can get to 2.2l!

03-08-2012, 12:08 AM	#10
240agsx Zilvia Junkie Join Date: Oct 2009 Location: placentia ca Age: 38 Posts: 306 Trader Rating: (14) Feedback Score: 14 reviews	Would this hg work for 86.5 bore Sent from my DROIDX using Tapatalk

03-08-2012, 09:11 AM	#11
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	yeah it would

03-11-2012, 11:16 PM	#12
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	still available!!

03-12-2012, 01:10 AM	#13
crayzwhiteboy Leaky Injector Join Date: Sep 2011 Location: miami Age: 35 Posts: 94 Trader Rating: (0) Feedback Score: 0 reviews	ok noob here. correct me if im wrong please the stock bore of an sr is 86.5 if i buy these pistons i will have to go .5mm over each cylinder turning my sr20 into an sr22 and the headgasket it is made for sr20 or sr22? and which sr motor is it for s13 or s14? i thought they were different

03-12-2012, 08:18 AM	#14
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	they are the same parts for s13, s14, and s15. the headgasket is for 87mm pistons. which means the gasket bore is 88mm. the stock bore of an sr20 is 86mm, which means youre 1mm oversize. to make it an sr22, you have to sleeve the block and use a 90mm bore.

03-13-2012, 08:56 AM	#15
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Lets go guys, make a reasonable offer

03-18-2012, 11:59 PM	#16
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	back up, still available

03-22-2012, 10:16 AM	#17
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	up up up lets get these sold

03-27-2012, 05:07 PM	#20
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	bring it back up

03-27-2012, 05:34 PM	#21
patsS14 Leaky Injector Join Date: Dec 2011 Location: st pete Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	can you bore out your block with a stock head or should it be built?

03-27-2012, 08:40 PM	#22
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	the bore wont affect the head. stock head will work fine.

03-31-2012, 02:03 PM	#23
Po_31 Nissanaholic! Join Date: Jan 2011 Location: houston Posts: 2,477 Trader Rating: (28) Feedback Score: 28 reviews	still have the gaskets

04-12-2012, 09:22 AM	#24
revolutionz_s13 Zilvia Member Join Date: Mar 2005 Location: North Dakota Posts: 175 Trader Rating: (3) Feedback Score: 3 reviews	Lets bring these back up, hopefully we can get these sold...make a reasonable offer, these are already cheaper than you will find anywhere online!