S13 hatch Roll cage

[Zach20Scott]

Looking to put a roll cage in an s13 hatch what are my options? Don't really like the Godspeed and Cusco design of going around the dash intruding the leg area. What else is out there without fabricating a custom one

[zeebrah]

........... Google.

[Nidd]

to many people troll just to up they're post count. if your not apposed to weld in's there's tons of options. just go to like frsport.com or enjukuracing.com and look around. they have pre made weld in cages. already bent and such.

[zeebrah]

Oh yea is that what I did? I obviously care soooo much about post count seeing how few I have... And reason I have so few is because 99% of the answers are out tere. Not trying to be a dick but.. Too many people are dumbasses and ask practically rethorical questions. And try to call people trolls

[Rut Ro]

What Nidd said. Several websites are out there to help you get the protection you need. Google can help too, but Id start with the larger, more well know 240sx retailers.

[zeebrah]

Oh but to be a 'troll' it's their not they're. ...and too* ...and not in's. ...and you're*

[Zach20Scott]

Thanks Nidd and Rut Ro for the info

[91ka24]

I have the enjuku er spec FD legal cage in mine. It's a weld in of course, but fitment is great and u can't beat the price

[landins13]

if you want a custom built cage expect about $200 a point for chromoly and any additional bars will of course increase the cost same with gussets and things like that.

you can find deals done by local guys just make sure that they comply with the type of racing you plan to do. no bolt in cage is going to pass tech for a tandem drifting in the US and it would be stupid to spend 2000 on a cage that cant pass either.

[Zach20Scott]

91ka24 how many points is your cage from ER and is it thru dash or around?

[91ka24]

It is thru dash, its a 6 pt with x style door bars. It's the first cage I have ever done, and i am very satisfied with it. Of course you have to cut and notch all your pipes, but its not to bad. I can post up pics when i get home

[JFoxx]

just go with a custom cage, its worth every penny...

[Prove It]

Also have an er spec cage and i love it. Enjuku also welds the cages in now. Call them and get a price. Its only a 2.5 hour drive

[JohnnyDrfiter22]

I have a ER spec design cage and hate it!!! But after i recieved mine about year and a half ago i emailed them and told them all the problems so maybe they fixed their design...

Check out S&W cages too, why do you want a roll cage to be cool guy race car or is it purpose built.

[91ka24]

here are a few pics of mine. i put the dash bar lower then most cause i retained the stock one. No it does not come in contact with your shins, i have had people 6'5 ride with me and they were just fine.

[91ka24]

s&w cages are good, but you have to pay extra for fd requirement tubing. now if you never plan on trying to go to fd, i would say that would be fine. but if your going to spend the money on doin a cage why not just get the spec cage and know you will be fine for any drift event. just my .02

[Zach20Scott]

Thanks for the pics and the info i have a performance shop but i would like to know how long it took you to complete this 100%, approx. hours. And what special tools were needed? Really appreciate the pictures looks awesome. (also the car is purpose built not a "cool guy racecar" haha)

[91ka24]

i did all the cutting, notching, and tacking it in place. that took a total of about 16hrs or so. again, i dont do this for a living lol. then my friend tigged it, which took about 13hrs. now if you were to mig it, it would obviously not take as long. all i used was a level and angle grinder to do my notching. hope that helps

[JFoxx]

is it just me or do those door x bars look rediculouly high? it must be a pain to get in and out with that cage... why did you weld them in so high?

(not trying to hate, just asking...)

[91ka24]

Ahhh there not that high. Could have made em lower but i like em where they r

[Zach20Scott]

Seems like alot more work then you'd think for buying a "kit". How did it come from ER? Just tubes? How did you bend them unless the ones that need to bent come bent?

[91ka24]

The cage comes pre bent