Motor shakes Plus funny idle help me out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

link240 · 03-07-2004, 01:57 AM

After a accident happened i got some questions. Anyone know if front frame damage effect proformance even thought he was hammerd out? After normal driving car ildes really low about 3 hundred, then goes back to 7-6 hundred. Now it shakes alot during idle. Anyone know what it could be plz help me.

DRFT · 03-07-2004, 02:53 AM

clean your throttle with carborator cleaner, or clean your maf

and it probably shakes cause of you accident, or just get new motor mounts because yours is probably worn out

cdlong · 03-07-2004, 06:22 AM

it might be a vaccum leak, something might have cracked in the accident. if you can't see anything, try this little test. turn the car on and let it idle, spray some carb cleaner or starting fluid on the vaccum lines and such. if the engine revs there is a hole there. it'll be hard to tell with the idle so off already, but it's worth a shot.

aeontony · 03-07-2004, 12:04 PM

Oh..you may want to check if the MAFS is secure on its stand, too. (i.e. the accident hasn't lodged it so it's flopping around).

FastBack 240 · 03-07-2004, 02:10 PM

My car did the same at idle until I checked the timing and it was way off. Just fix your timing and I have a strong feeling the stubling and shaking will go away.

formeRiceR · 03-10-2004, 01:01 AM

how do you check timing?

FastBack 240 · 03-10-2004, 09:49 AM

Go to a mechanic. It is adjusting the distributor to correct degree.

epoxy_nc · 03-10-2004, 07:37 PM

i am having this same problem with my SR.

anything else to look for ?

03-07-2004, 01:57 AM	#1
link240 Zilvia Member Join Date: Sep 2003 Location: moreno valley, ca Age: 39 Posts: 186 Trader Rating: (0) Feedback Score: 0 reviews	Motor shakes Plus funny idle help me out After a accident happened i got some questions. Anyone know if front frame damage effect proformance even thought he was hammerd out? After normal driving car ildes really low about 3 hundred, then goes back to 7-6 hundred. Now it shakes alot during idle. Anyone know what it could be plz help me. Last edited by link240; 03-07-2004 at 02:13 AM..

03-07-2004, 02:53 AM	#2
DRFT Post Whore! Join Date: Apr 2003 Location: Pow Pow Age: 41 Posts: 3,744 Trader Rating: (0) Feedback Score: 0 reviews	clean your throttle with carborator cleaner, or clean your maf and it probably shakes cause of you accident, or just get new motor mounts because yours is probably worn out __________________ ApexNetwork.Net Sacramento & Norcal Forum

03-07-2004, 06:22 AM	#3
cdlong Nissanaholic! Join Date: Jun 2003 Location: Colorado Springs Age: 44 Posts: 1,865 Trader Rating: (0) Rides Gallery: cdlong Feedback Score: 0 reviews	it might be a vaccum leak, something might have cracked in the accident. if you can't see anything, try this little test. turn the car on and let it idle, spray some carb cleaner or starting fluid on the vaccum lines and such. if the engine revs there is a hole there. it'll be hard to tell with the idle so off already, but it's worth a shot. __________________

03-07-2004, 12:04 PM	#4
aeontony Zilvia Junkie Join Date: Jan 2003 Location: Norcal Posts: 303 Trader Rating: (0) Feedback Score: 0 reviews	Oh..you may want to check if the MAFS is secure on its stand, too. (i.e. the accident hasn't lodged it so it's flopping around). __________________ S14.5 for sale. Must move on with life...=( http://www.zilvia.net/f/showthread.php?t=56822 Au no wa wakare no hajime...

03-07-2004, 02:10 PM	#5
FastBack 240 Zilvia Addict Join Date: Dec 2002 Location: Motor City......MI Age: 39 Posts: 859 Trader Rating: (0) Feedback Score: 0 reviews	My car did the same at idle until I checked the timing and it was way off. Just fix your timing and I have a strong feeling the stubling and shaking will go away. __________________

03-10-2004, 01:01 AM	#6
formeRiceR Zilvia Member Join Date: Dec 2001 Location: Mass Age: 43 Posts: 280 Trader Rating: (0) Feedback Score: 0 reviews	how do you check timing? __________________ "Street racers don't need girls." -Lonely Driver Learning about cars one FLAME at a time ... (thanks to TNORD)

03-10-2004, 09:49 AM	#7
FastBack 240 Zilvia Addict Join Date: Dec 2002 Location: Motor City......MI Age: 39 Posts: 859 Trader Rating: (0) Feedback Score: 0 reviews	Go to a mechanic. It is adjusting the distributor to correct degree. __________________

03-10-2004, 07:37 PM	#8
epoxy_nc Zilvia Member Join Date: Jan 2004 Location: nc Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	i am having this same problem with my SR. anything else to look for ? __________________ epoxy sr20det powered '93 coupe se

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode