Code 34 s13 ka24de

[mnsmith293]

The car is a 1992 240sx with a used motor that was put in about 6 months ago. It has never ran quite right and I am trying to get it running correctly. There had no check engine light on so I didn't think to pull the codes until now.

It came up with code 34 and that is it. I was wondering if it could be a false positive, my car has solid poly urethane motor mounts? Will this put the car into limp mode?

Currently the motor starts up easily and cruises well with no smoke. However when I am accelerating sometimes it will bog a little or lag and then catch and start accelerating. The car has no AIV, charcoal canister or cat. Cone filter and crappy 2 inch catback (the old one broke off lol). New: Spark plugs gapped properly, plug wires, distributer cap and rotor, fuel filter, air filter, new oil filter and 10w30.
It does make a ticking sound once with each motor revolution but I think that is lifter tick but I am not sure. I am getting a compression tester today and I will post the results. How would I tell if what the ticking sound is and please help me fix this bogging it is driving me nuts.