Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-01-2015, 06:11 PM   #1
coupeyy
 
Join Date: Apr 2015
Location: Utah
Age: 28
Posts: 4
Trader Rating: (0)
coupeyy is an unknown quantity at this point
Feedback Score: 0 reviews
240SX (single cam KA) misfiring on cylinders 1 and 4

Hey everyone. I'm new to these forums. I got my S-chassis about three months ago. I've never gotten the chance to drive it, and I just now registered it. This is going to be my daily driver. When I bought it, the guy didn't know anything about 240's. (I'm not implying I know everything about them, just saying) I traded my car for his, and all he told me was that had a bad idle and needed a "tune up". I just recently got the funds to start working on my car and have replaced a bit of things for it. My brother is pretty mechanically inclined so I followed what he told me to do. I replaced the 02 sensor, distributor, cleaned the ISC, fuel injectors and mass air flow sensor. There was not any change when I did that. My brother and I were at the car one day and I told him to unplug injectors one by one to see if any were bad. So we did, and injectors one and four made no difference when they were unplugged. We cleaned the injectors, and checked the wires for current. After the injectors were cleaned we moved them to cylinders two and three just to see if it were the injectors themselves that were bad. After doing that, there was still no change. The idle seems to drop and eventually the car dies when I put the car in reverse/drive. At this point I'm really lost. That's why I've come to this website, because I'm sure there are people that are more experienced with the KA, as I've been working on the 4G63 more. (with my brother) I will provide a YouTube link as well so you can see the problem first hand. (Please take note that the rattling noise is not a rod knock, it is the exhaust hitting the driveshaft.) Thank you for any help, as it will be very appreciated. If you have any questions or concerns I will gladly respond to them as soon as I can. Thank you!




YouTube link for the problem: https://youtu.be/kwb1TtID7fg
coupeyy is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net